Jump to content
SAU Community

Recommended Posts

Ive got a 7" screen in my dash area in my car. I see the computer they got in the R34 GTR and its quite mint.

Is something like this achievable? Are there any kits which can output data via a tv out cable to input into my headunit?

Damn it would be nice to make something so simple like that. I'm seriously surprised no one has thought of it. Just need a little computer I guess which reads all the sensors and displays them on-screen.

I could do something using a carputer, but would be limited as I would have NO idea how to get readings from the car into a windows operating system...

Check out this pic.

53362d1231620872-digital-gauge-software-gauges.jpg

Link to comment
https://www.sau.com.au/forums/topic/348093-digital-gauge/
Share on other sites

Greedy I think just bought out a touch screen engine monitoring system or it may have been one of the other big Japanese brands. I guess there would be a way to wire something like this to your screen but at the end of the day it would be cheaper/easier to just use the unit itself

If the genuine gtr items were cheap enough they would be the go. But I'd say to do one as you want would require some sort of mini computer in the car and a custom

program?

But if you could find someone to do this I'm sure there would be a market for it. I have a 7 inch screen in my car and something like that would be cool to check vitals. Especially seen as I could run it behind my music/iPod playing

Edited by 89CAL
Link to comment
https://www.sau.com.au/forums/topic/348093-digital-gauge/#findComment-5598638
Share on other sites

If you running the stock ecu or a piggy back you could use a real basic computer setup and use the ECUtalk software and cable. it has a whole stack of available software with different displays. A few are vey close to your pic. Thatd be the easiest way i can think off.

Link to comment
https://www.sau.com.au/forums/topic/348093-digital-gauge/#findComment-5598703
Share on other sites

  • 2 weeks later...

The EPSON system isnt a screen, its a computer that connects to the NISMO screen. I have the NISMO screen dash in my car, but I dont have the EPSON system sadly.

Another option is the HKS CAMP or CAMP2 system. A quick Google search should give you the info you need.

Link to comment
https://www.sau.com.au/forums/topic/348093-digital-gauge/#findComment-5606044
Share on other sites

The EPSON system isnt a screen, its a computer that connects to the NISMO screen. I have the NISMO screen dash in my car, but I dont have the EPSON system sadly.

Another option is the HKS CAMP or CAMP2 system. A quick Google search should give you the info you need.

These are the ones to go for, i have had the epsom ej1 and found it to be very lacking, espensive and hard to find, the hks ones seem to be a lot better and a lot easier to get a hold of and both have an rca out to plug into any screen, they would also have some sort of customer support, from my research the ej1 was never sold retail, it only came out in certain models as an oem product which means getting any sort of support is impossible.

Link to comment
https://www.sau.com.au/forums/topic/348093-digital-gauge/#findComment-5606118
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...