Jump to content
SAU Community

Recommended Posts

IMO the officer is in the wrong and cannot specify which VicRoads you need to attend as any defect can be cleared at ANY VicRoads.

You would be wrong here, an officer can tell you what vicroads to get it cleared at. If they want to make life hard, they could have put Mildura.

In most cases they right ANY (vicroads) in this section, but nothing stops them from put a certain vicroads.

If they have put on there VASS required, Vicroads wont clear the defect until you get the certificate. The VASS engineers might be picky with other mods you have.

Your correct, if a VASS is stated as required then you need one. it won't be cleared without it.

And yes an officer can require one on a defect notice.

i know cops have the authority to defect a car based on an observation of unroadworthiness and the right to report you to the EPA based on an observation of the car being below emmisions standards .... but i wonder if they have the right to order a vass engineers certificate!

Yes they do.

So the police. As stupid as some can be are qualified to ask you to get a vass certificate? That's f**ked up. Before any cop does a check on your car ask them if they have completed the according training and have the certificate with then that they can do a rwc check. Has caught out a few cops in my time :) they cbf calling tmu so I left.

Cops don't need to do any training to issue defects, as soon as they are cops they can.

No one carry's the certificate, as its not required and anyway as its an A4 sheet of paper, so its not that easy to carry :rolleyes:

ive been scouring the net through all the traffic laws, acts etc. i cant find anything solid about police and vass, do you know where i can find it?

here for VASS

http://www.vicroads....atoryScheme.htm

and

http://www.vicroads....difications.htm

and

http://www.vicroads....8340/0/VSI8.pdf

Edited by tss

ive been scouring the net through all the traffic laws, acts etc. i cant find anything solid about police and vass, do you know where i can find it?

And for the police bit

here

http://www.austlii.e...986125/s14.html

*PS sorry about the number of post, I was replying as I was reading

Edited by tss

i can see the defect bit, and the conditions of use of the vehicle part, what about the right to request a vass certificate

Here it is, under Road Safety (Vehicles) Regulations 2009 section 257 http://www.austlii.e...09309/s257.html

257 Use of modified vehicles

(1) A person must not use on a highway a vehicle that has been modified from the condition in which it

was in when first registered unless the modification—

(a) has the Corporation's approval; or

(b) has been carried out in accordance with guidelines published by the Corporation

which are available—

(i) at the offices of the Corporation; or (ii) on the internet website of the

Corporation.

Penalty: 5 penalty units.

(2) The Corporation must not give its approval to or in respect of a vehicle modification if the vehicle no longer complies with the standards for registration unless the Corporation proposes to register the vehicle under regulation 30(1).

The Corporation approval means a VASS certificate

Guideline published by the corporation means VSI (vehicle standards information)

I can't prove this more then this, without releasing internal documents which I not allowwed to do.

But trust me, I do this for a living, I'm giving you the correct information, I have no reason to lie to you. If you really want to check call the the police general number and ask to speak to the Vehicle safety testing centre and ask them.

You own me a beer sometime for digging this stuff up.:thumbsup: as I'm doing it on my own time to help you.

And yes the cop may be was a bit tough on you, bit you did know that you were breaking the law. as it's said "do the crime, do the time"

i believe you mate i was just after something written in regards to vass i couldnt find anything

Yeah no problems, I'm happy to help if I can.

The information I posted was from the Victorian police Vehicle Safety Manual, but I can't post it up.

I know it doesn't spell it out in laymans terms but thats is where it relates.

What the cop has done is right, maybe a little harsh? I can't say as I wasn't there! but what he has done is not outside his powers.

Edited by tss

Yeah no problems, I'm happy to help if I can.

The information I posted was from the Victorian police Vehicle Safety Manual, but I can't post it up.

I know it doesn't spell it out in laymans terms but thats is where it relates.

What the cop has done is right, maybe a little harsh? I can't say as I wasn't there! but what he has done is not outside his powers.

sounds to me like you're a cop :O

Quick everyone, hide your mods!!1 :P

(welcome :) )

far, far, far worst then that,:whistling: I've been outed earlier, look it up.

oo i see.

Well if you cant beat them, join them? Welcome to SAU :P

haha, depends what you mean by worse. I find powertripping cops much worse as they try to ping you with nonsense, whereas you have your facts straight and you cant argue with the facts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...