Jump to content
SAU Community

Weird Clunking Noises And Wheel Jerking

SargeRX8
 Share

Recommended Posts

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Hey all,

My R33 has been having some issues. When I reverse, I can hear a clunk noise from the passenger side front suspension/wheel area and I can feel it through the steering. If I hook the steering to one direction, it feels like something is moving, like the wheel will turn at a smooth motion then at one point it just jerks and it feels like the wheel clunked.

This is really really hard to explain. originally everytime I done a U turn I would get a clunk noise which turned out to be my castor rods with broken bushes, so I replaced them with an aluminium rod.

What could cause these weird symptoms? Nothing really happens when I'm driving at normal speed, its only when reversing or parking which involves alot fo wheel turning.

The car has been in an accident but everything is very straight(it was minor). Could it be the sway bar? Sway bar links? The suspensions is tein coilovers.

If anyone here is in Sydney and has any idea I can show you the car.

leer34 Collaborator

leer34

Posted
Posted

This is really really hard to explain. originally everytime I done a U turn I would get a clunk noise which turned out to be my castor rods with broken bushes, so I replaced them with an aluminium rod.

was gona say it sounds like flogged out castor rod bushes, til i read that ^^^^ next guess would be cv's...if u havent already id be making sure everything is nice n tight. i learnt my lesson the hard way :blush:

SargeRX8 Grand Master

SargeRX8

Posted
  • Author
Posted

Its a series two gtst. What are CV joints? I thought they were just on front wheel drive cars and rear wheels just have bearings at the front. I'm gonna change my sway bar links, there is too much play in them.

Ill check everything is tight tomorrow. Are CV joints something I can do my self?

leer34 Collaborator

leer34

Posted
Posted

Its a series two gtst. What are CV joints? I thought they were just on front wheel drive cars and rear wheels just have bearings at the front. I'm gonna change my sway bar links, there is too much play in them.

Ill check everything is tight tomorrow. Are CV joints something I can do my self?

sorry ur right its not a cv joint...the part im talking bout i duno what its called, its one of the joints in the steering rack. my mate just did it to his car.he damaged one of the joints so at low speeds, especially in reverse when u turn the wheel to a particular spot it would jolt the wheel and make a clunking noise, but that was only when the wheel reached one point....yeah good idea mate, if theres too much movement in them, could well be ur problem, ive never taken them out so cant help ya on that one.

i flogged out two sets of castor rod bushes in a week on my old s13 coz i didnt do a proper check after mounting a curb.. can never be too careful :thumbsup:

SargeRX8 Grand Master

SargeRX8

Posted
  • Author
Posted

sorry ur right its not a cv joint...the part im talking bout i duno what its called, its one of the joints in the steering rack. my mate just did it to his car.he damaged one of the joints so at low speeds, especially in reverse when u turn the wheel to a particular spot it would jolt the wheel and make a clunking noise, but that was only when the wheel reached one point....yeah good idea mate, if theres too much movement in them, could well be ur problem, ive never taken them out so cant help ya on that one.

i flogged out two sets of castor rod bushes in a week on my old s13 coz i didnt do a proper check after mounting a curb.. can never be too careful :thumbsup:

I think you're onto something. My dad inspected the car and he recons the guy drove up a gutter pretty badly and caused some damage and some very minor panel damage. It looks like the structure is sound but it was evident to me the car has been in an incident. The headlight mounts are broken but the headlight in tact. Ive got the steering rack and all the components in my old car.

I'm waiting for my brother to move his box and motor out of the garage so I can extract the motor from my car and get to the parts I need. Gonna get a whiteline sway bar with new mounts and replace as much rubber crap as I can.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...