Jump to content
SAU Community

Recommended Posts

hi guys,

i recently picked up a red gtr & was contemplating on whether i should respray the rear bar for the reason that the bottom part of the bar has been left raw black, similar to the front lower lip...what do u guys think about this finish?

that lower section of rear bumper is actually a rough finish as well, again, similar to the front lower lip.

its kinda starting to grow on me in a funny way :)

post-8728-0-88053300-1294135834_thumb.jpg

post-8728-0-48327700-1294135842_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/349190-anyone-ever-seen-this/
Share on other sites

I have seen something similar on red sideskirts for the r32. It had black underneath and was wondering why they werent painted all red? Perhaps Nissan purposely had a red/black paint theme? Or perhaps the skirts i saw for sale came off the car with the red/black bumper you have? haha

i owned a few et turbo pulsars and exa, and they all had that rough finish about 3 inchs in height all around the car, was the same colour as the car though . i know the et pulsar came like that from factory.

Maybe some skylines did to?

Edited by Rb Liner25

ive owned 3 R32 rear bars and theyeve all had that unpaitned plastic at the bottom

interesting, were they gtr's or gtst's?

import versions im guessing as well...this my 3rd gtr & ive never seen this paint scheme before

Pretty sure the stuff is called Stone Guard, is a textured finish, as mentioned above its used along sill panels etc, looks good I reckon.

i dont think it is an actual paint finish though as its raw plastic & doent scratch, you can feel that the plastic finish is different as well - has a rough grain in it

  • 2 weeks later...

I have seen something similar on red sideskirts for the r32. It had black underneath and was wondering why they werent painted all red? Perhaps Nissan purposely had a red/black paint theme? Or perhaps the skirts i saw for sale came off the car with the red/black bumper you have? haha

Nah what happened is they didn't dunk the part in the paint all the way :P

i dont think it is an actual paint finish though as its raw plastic & doent scratch, you can feel that the plastic finish is different as well - has a rough grain in it

Right. Even the GTR with the painted lower valence, if you pay close enough attention to detail, it's also a rough surface but has a coat of paint to match the rest of the body kit. These lower black portions were stock on the GTS. Since GTS/GTST/GTR bumpers are all interchangeable, that is most likely a bumper from a GTS. Perhaps the previous owner was involved in a small collision - the GTS parts are far easier to source > GTR OEM.

You can paint it without an issue. Mine was also black;

IMG_1068.jpg

On red, i wouldnt mind so much, but on silver it stuck out like a sore thumb. Painting it takes 2 seconds, so if you dislike it, have your paint matched at the local auto parts and paint over it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...