Jump to content
SAU Community

Recommended Posts

Hi All,

HKS Super Dragger Exhaust + 3.5" from cat, suit r32 or 33

Excellent condition, 3.5 pipe opens out to a 7" Tip, Sounds awesome (My favorite exhaust note from a gtst) Will bolt straight on!

Large Front Mount Intercooler + Piping for an R32

Cooler measures slighly larger than a GTR Cooler. Its quite a bit thicker. Ill get dimensions tomorrow when it's not raining. Kit comes complete with all pipes, already set up for an R32 (bar may need to be cut and also a small cut in engine bay may be needed) Will bolt straight on!

Upgraded M-Spec Brakes + DBA Slotted and Vented Rotors

2 piston calipers on front, singles on the back. Painted Red. + DBA Rotors on the front. The pair of rotors are worth a grand by themselves.

(Exchange for existing brakes prefered)

Genuine GTR wing + Grille

Painted black, get the baby gtr look happening right now ladies and gentlemen! :) Grille has minor scratches but they are up where you cant see them.

GTR Bonnet (not genuine)

Heres a bonnet that looks like a gtr one but is just a modified GTST one. All the hard work is done and it is hard to spot the difference. Also Black

Drivers M-Spec Skirt + Rear Ser1 Pods

Painted Black, wat more can i say :D

For all parts enquiries or Reasonable Offers Email me at

[email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...