Jump to content
SAU Community

Recommended Posts

be honest, you are running a meth lab at home, stop these nonsense stories of mixing your own fuels and such

I don't need to run a meth lab, I work at the pharmacy :thumbsup:. We have poor quality fuels here, imported from Singapore or Philippines, so I have to mix my own fuel for my R33 GTST. If you want, I can teach you and your husband several fuel mixtures of my own for free.

Being a cyclic hydrocarbon and containing 7 carbon atoms per 8 hydrogen atoms, as opposed to octane and other alkanes that have more than two hydrogen atoms per 1 carbon atom, doesn't toluene or xylene produce significant amounts of soot compared to usual petrol? It is not a problem for race engines that get rebuilt before every race, but may not be suitable for street engine that sees little maintenance.

I don't get soot, probably because the I don't run pure toluene or xylene. You do get a lot of soot from just plain flame burning toluene or xylene, but it is around the same as gasoline. As I said, I haven't had any problems from years of running toluene mixes with my engines. And if soot bothers, then diesel engines should have more problems than gasoline engines, which they don't (stupid logic I know).

91 octane now costs 1.99.9 . and thats in the major cities .

to buy e 85 here you have to buy a drum and get it shipped like 800 kays and it costs $600 before shipping

cheers to people who had something relevant to say .

go away who ever copied and pasted something from wikipedia

So the verdict apparently is that pure toluene or xylene may require more often engine rebuilds, but toluene mixed with petrol is a good thing and a safe way to increase octane number without significant adverse effects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...