Jump to content
SAU Community

A/c

J'son

By J'son,
in Australian Capital Territory

 Share

Recommended Posts

J'son Proficient

J'son

Posted
Posted (edited)

Looks like I need a new A/C compressor. It is making a bit more noise than is normal.

Any one know how much work replacing it would be? Also any one got one or know a good place I can get a new or re-conditioned one?

Ta.

Edited by J'son
Link to comment
https://www.sau.com.au/forums/topic/349879-ac/
Share on other sites
StinkyPoo Mentor

StinkyPoo

Posted
Posted

Easy for me to replace...... (Degas, unplug wire, remove a/c lines 2x10mm bolts, remove stone guard, remove 4 bolts holding the compressor, remove compressor).

No idea where a good place to get one. I think the cheapest option would be to find someone with a front cut, cos the usually throw that stuff out.

If you want to goto a shop, my guess would be Trojan. They might be the same as a different car that is Australian delivered, this would be a cheaper option.

NatRad in Phillip have done stuff for my cars. Not the cheapest but I do like their work.

Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5618963
Share on other sites
wal32r Collaborator

wal32r

Posted
Posted (edited)

You really should replace the receiver drier too if the system is opened for more than 10 mins, also as Eiji said, you will need to put oil in the system too. I think its roughly 30ml for every part you replace. If you can, measure the oil that comes out of the old compressor and try and put that amount in the new one.

I can regas it for you and should be able to inject oil too if needed.

PM me if you need anymore help.

EDIT: i can get prices on parts too if you like, as i can get them trade price :)

Edited by wal32r
Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5619454
Share on other sites
wal32r Collaborator

wal32r

Posted
Posted

You cant check the oil level as far as i know, the oil is vacuumed out and replaced in the regassing process. Im not 100% sure how other machines work but im sure with our one you can only inject oil when doing a regas. And even then youll have to try and find out how much oil usually goes into the system in R33s, as all cars are different.

Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5619860
Share on other sites
J'son Proficient

J'son

Posted
  • Author
Posted (edited)

I have a compressor hanging off an old rb25 block, yours for nothing if you come get it.

I noticed in the other thread you are in banks. I'm a northie, any chance you come any more north, else i will head out your way. I will wait to hear back from others also, maybe it just needs the oil from a regas?

You cant check the oil level as far as i know, the oil is vacuumed out and replaced in the regassing process. Im not 100% sure how other machines work but im sure with our one you can only inject oil when doing a regas. And even then youll have to try and find out how much oil usually goes into the system in R33s, as all cars are different.

Any ideas where I can find this info out anybody?

ALSO Wal32r how much would a regas cost me? I'd like to let you hear and assess the issue sometime, you may get some ideas or have suggestions and recommendations.

I don't use the A/C heaps, but I like it to work when need it...

Edited by J'son
Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5621004
Share on other sites
wal32r Collaborator

wal32r

Posted
Posted

I can probably do a regas for $100 - $110, providing the car is on R134A gas.

If your compressor is noisy, id say its probably too far gone, unless the noise is the clutch on the front which is rare. With most compressors you can change the clutch on the front, but if its anything other than that youre better off getting another compressor.

Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5622420
Share on other sites
J'son Proficient

J'son

Posted
  • Author
Posted

Mine works great just need no get the noise looked at and see if is a prob, fixable or needs the new compressor...

I'll prob grab the one off zebra if can though.. Is it possible to get it off you somewhere more central or want me to come by to pull it off?

Link to comment
https://www.sau.com.au/forums/topic/349879-ac/#findComment-5624365
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...