Jump to content
SAU Community

Recommended Posts

Hi all, Not sure where to post this as there doesn't seem to be a styling and Mods forum yet for 35's,so I have 3 sets of undisplayed plates for a V-Spec 35 GTR35V- VSPC35 AND R35ZLA if anyone is interested you can call me for the prices,Cheers GREYPEARL.0417032732.

Link to comment
https://www.sau.com.au/forums/topic/349925-do-you-own-a-v-spec-r35/
Share on other sites

Perhaps post this on a Japanese forum, seeing as there is as much chance of driving a Vic Registered car in Tokyo as there is of registering a SpecV R35 in Aus... Hope you didn't pay too much..

Won't the V-Spec 35 be the same as the other predecessors eventually and be accepted here, and why not?? I am surprised to hear that.GREYPEARL.

Cars can only be imported if that model was not sold on the ADM, and the Spec V as a variant of the GTR would not be eligible for import apart from as a private (eg owned in Japan for 3 years and bought in as part of moving to Australia) I am sure there are people who know far more than me, who could clarify, but even the 15yo rule won't work because that was changed too. Even R32s manufactured in the same months as the ADM ones cannot be imported AFAIK

Cars can only be imported if that model was not sold on the ADM, and the Spec V as a variant of the GTR would not be eligible for import apart from as a private (eg owned in Japan for 3 years and bought in as part of moving to Australia) I am sure there are people who know far more than me, who could clarify, but even the 15yo rule won't work because that was changed too. Even R32s manufactured in the same months as the ADM ones cannot be imported AFAIK

Hi Afaik,Excuse my ignorance but does ADM mean Australian Domestic Market??Do you know what the various model GTR VSpec models sold for new compared to non- VSpec in Australia,or were they only ever bought here secondhand.Cheers GREYPEARL.
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...