Jump to content
SAU Community

Recommended Posts

I've been thinking about fuel for my rb30. I was going to go e85 but we can't get it at the pumps where I'm at. I was going to ship it by the barrel, fill up for races(time attack, drag, HPDE, etc), and use pump gas for the street.

BUT! If I'm going to be shipping fuel and making an alcohol safe fuel system, why not use methanol? According to my math, even at 75/25 meth-to-pump it should make more power than E85. It should also run cooler, be easier to find (lots of drag cars here,) and be cheaper.

Anybody gone done this road before?

Interesting fact- in china, where corn is expensive, flex fuel vehicles run M85!

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/
Share on other sites

Nobody has any experience? I keep looking around and all I'm finding is a lot of bs about methanol being dangerous and toxic. It's actually less dangerous and toxic than gasoline.

I think the only reason it isn't used is because Injectors large enough to use methanol and still idle and run normal only recently became available. (id2000)

Unless someone has a good reason not to do it I'm gonna give it a shot.

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5630372
Share on other sites

I can add that buying E85 at the pump will only give many inconsistent results.

Preferred race fuel is C16 or Aviation fuels as they prove to be more stable throughout the year.

As for Power, Methanol makes a bigger bang but more costly to obtain. You will require some form of license in most developed countries.

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5630563
Share on other sites

I've been thinking about fuel for my rb30. I was going to go e85 but we can't get it at the pumps where I'm at. I was going to ship it by the barrel, fill up for races(time attack, drag, HPDE, etc), and use pump gas for the street.

BUT! If I'm going to be shipping fuel and making an alcohol safe fuel system, why not use methanol? According to my math, even at 75/25 meth-to-pump it should make more power than E85. It should also run cooler, be easier to find (lots of drag cars here,) and be cheaper.

Anybody gone done this road before?

Interesting fact- in china, where corn is expensive, flex fuel vehicles run M85!

What is the engine built for? Compression, expected boost, is it intercooled, what is the injector location?

Edited by rob82
Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5630810
Share on other sites

I can add that buying E85 at the pump will only give many inconsistent results.

Preferred race fuel is C16 or Aviation fuels as they prove to be more stable throughout the year.

As for Power, Methanol makes a bigger bang but more costly to obtain. You will require some form of license in most developed countries.

Pump e85 is fine provided you tune for the variations. We can match c16 but @ $1 a litre....

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5630944
Share on other sites

If you are talking about E85 vs meth, why not go WMI? You get pretty much the same power boost as you would when tuning for E85 and the methanol cooler running = the best of both worlds. And you won't use much unless you are boosting, don't need huge injectors, can run on pump fuel everywhere, don't need to upgrade any fuel lines or systems and there are some great packages out there for it. Plus you can vary the amount of meth by juggling with nozzle sizes and multiple nozzles. It is on tap just waiting for you to boost it!

As an example I used probably 100-150ml in 400km of highway driving and I have a 3.5 litre reservoir. I know that when you race with it it is used heaps more, but you can top up between laps etc.

And mixed 50/50 WM in a container is pretty much inert.

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5631965
Share on other sites

One bad thing I've seen with methanol is it burns with almost invisible flames, though E85 could be the same.

All those burnout cars that run it seem to set their tyres and half the track alight though. I also saw an evo with big cams shooting 1m flames on the overrun after it supposedly had been tuned, whether this was the car or the fuel I do not know.

Anyone know more ?

Edited by Rolls
Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5633915
Share on other sites

One bad thing I've seen with methanol is it burns with almost invisible flames, though E85 could be the same.

All those burnout cars that run it seem to set their tyres and half the track alight though. I also saw an evo with big cams shooting 1m flames on the overrun after it supposedly had been tuned, whether this was the car or the fuel I do not know.

Anyone know more ?

The 15% fuel in the methanol would cause the flame to be visible :)

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5633942
Share on other sites

BoostedR's build data from the -5 vs GTRS thread

I have built a RB31/26DETT 824hp -engine hp

264 9.8 HKS

Tomei Dumps

3" x 2 (no mufflers)

530ft lb @ 2800rpm

22psi max

Garrett -10's

Ported std manifolds

BP98 with 10% methanol

Motec

That result proves you can lean on the engine a lot more with just 10% methanol. A water/meth injection setup would produce a similar result.

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5633983
Share on other sites

I have an aquamist hfs-6 on the car right now. It works good but won't give the same performance as mixing meth. It's also something else to break at the track.

The 15% gasoline is supposed to add color to the flame also. I might try a 50/50 mix and move up from there.

Link to comment
https://www.sau.com.au/forums/topic/350574-methanol-vs-e85/#findComment-5634225
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...