Jump to content
SAU Community

Brendans 260Rs

Brendan260RS

By Brendan260RS,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Brendan260RS Enthusiast

Brendan260RS

Posted
Posted

IMG_9030.jpg

hey guys, got this a little while ago,

1998 260RS stagea

so far I've upgrade the exhaust a bit (front pipe and cat before it hit dyno, just replaced rear muffler and trying to get a 3.5" resonator), taken boost restrictor out and installed a Bosch 044 and a haltech. Currently putting down about 210awkw's with a restrictive exhaust.

Next plans are twin plate clutch and a pair of Garrett turbos. (2860's -5)

the wheels on it in those pics are my mates (18x9.5+18) and I just run the autech stockies

Let me know what ya think guys!

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/
Share on other sites
Brendan260RS Enthusiast

Brendan260RS

Posted
  • Author
Posted

Yeah the front needs a little more low (it's running fully adjustable Zeal coilvers)

My mate bought those wheels for his JZA70 supra not long ago so I don't think he'll part with them (even tho they look sexual on my car lol)

see how I go I guess haha.

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5635971
Share on other sites
Verms Mentor

Verms

Posted
Posted

Looks good and very similar to mine. Very similar number plate. I'm curious to know how much power it will have once the exhaust is done. Mines currently pushing 190kws at all 4 but is being limited by injecters. getting a fuel pump and fpr fitted soon!!!!!!!!1

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5635975
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Looks good and very similar to mine. Very similar number plate. I'm curious to know how much power it will have once the exhaust is done. Mines currently pushing 190kws at all 4 but is being limited by injecters. getting a fuel pump and fpr fitted soon!!!!!!!!1

You must be kidding! My RS4 with an RB25DET made over 200awkw with stock injectors. Anyway don't bother with the fpr - get some better injectors and an aftermarket ecu for a start.
Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5635985
Share on other sites
numleg Community Regular

numleg

Posted
Posted

Yeah i got 244.5 at the rears on stock turbos and just a walbro in my 260RS, pretty much every other bolt on know to man though. Power FC and Z32s are the go.

My tuner tells me stock FPR will be fine when i add 2860s and 700cc injectors,

Nice plates dude, These things look amazing dumped but the overhang at the front is a real killer i couldn't imagine going too much lower.

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636132
Share on other sites
Brendan260RS Enthusiast

Brendan260RS

Posted
  • Author
Posted

Yeah my stag has 227 I think at the rears with the exhaust dropped... Think it lost about 4kw with the cat attached. K&N panel filter, haltech, 044 and 1 bar are my only mods.

And thanks, saw the plates were aailable and purchased them before I bought the car haha. They were going on a vz if I hadn't bought a 260 when they arrived (had to have a car to put them on in order to order them). Luckily they weren't tainted by commodore faggotry lol.

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636244
Share on other sites
bLaQ.bOi Mentor

bLaQ.bOi

Posted
Posted

just read that they arent your wheels... spewin...

although i havent seen it on an older model stag but i have them on my m35... ive got a set of v35 skyline wheels on mine currently, actually look pretty good, they have a convex styling to them so they kinda POP a bit!

but yea any wheels can look good, spacers provided!

so jelly of your 260rs, was going to import one actually but i caved for the newer stag, about the same price anyway... had a gtr before and maintenence on rb26 ruins my life lol

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636300
Share on other sites
_Ryan_ Grand Master

_Ryan_

Posted
Posted

Looks good and very similar to mine. Very similar number plate. I'm curious to know how much power it will have once the exhaust is done. Mines currently pushing 190kws at all 4 but is being limited by injecters. getting a fuel pump and fpr fitted soon!!!!!!!!1

Stock FPR is fine for heaps of power on an RB... only those who are avoiding an injector upgrade tend to play with them.

Take it to another workshop for a second opinion and get them to check the fuel system over, a pump on the way out(for example) could be causing issues for you(or a pump at its limits...), injectors are fine for a fair bit more. Workshop or car seems NQR :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636313
Share on other sites
Brendan260RS Enthusiast

Brendan260RS

Posted
  • Author
Posted

just read that they arent your wheels... spewin...

although i havent seen it on an older model stag but i have them on my m35... ive got a set of v35 skyline wheels on mine currently, actually look pretty good, they have a convex styling to them so they kinda POP a bit!

but yea any wheels can look good, spacers provided!

so jelly of your 260rs, was going to import one actually but i caved for the newer stag, about the same price anyway... had a gtr before and maintenence on rb26 ruins my life lol

yeah it's a nice car and I'm in love with it. Always wanted a GTR but I've had a few 2 drs already so I thought I'd get something practical and fast :)

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636842
Share on other sites
Global_Warmer Proficient

Global_Warmer

Posted
Posted

yeah it's a nice car and I'm in love with it. Always wanted a GTR but I've had a few 2 drs already so I thought I'd get something practical and fast :)

The same reason I got my 260RS. A family car... with some serious horsepower.

Link to comment
https://www.sau.com.au/forums/topic/351191-brendans-260rs/#findComment-5636990
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Omg Brake pedal removal.. FML!!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
×
×
  • Create New...