Jump to content
SAU Community

Headgasket To Fit 86.5Mm Bore

gobiz

By gobiz,
in Engines & Forced Induction

 Share

Recommended Posts

Tangles Grand Master

Tangles

Posted
Posted

get the 87mm mate

cometic street pro is a good kit, can get the whole top-engine gasket kit for under $300 delivered, ebay

includes Multi layered steel head gasket

Im using 1mm oversize head gasket on both my Rb25 and Rb26 engines, stock bores

Amoreuxi Newbie

Amoreuxi

Posted
Posted (edited)

Do consider the permaseal MLS gasket.

As good as the cometics.

They also do inlet etc gaskets for the rb's.. The inlets look a little better than the factory stuff but factory is better on the exhaust side.

The few times I've replaced my inlet gasket (just removing head playing with restrictors etc) i've found the factory inlet gasket appears the be leaking 'slightly', the permseal doesn't appear to have, its a little chunkier on the metal embossed seal.

I've never machined the inlet/head face so it may simply be that but the permaseal inlet gasket definitely sorted the very very slight seep i had.

The Permaseal MLS i grabbed from motor traders for a little over 200. the inlet/exh gaskets etc was dirt cheap. $100ish all up from memory.

Edited by Amoreuxi
Char Experienced

Char

Posted
Posted (edited)

mine is 86.5mm cant remember what thickness the head gasket was atm, think it was cometic metal headgasket mulit layer VL Turbo one

got compression of 160 on all 6 --pistons are 8.5:1

can ask my tuner if u need

Edited by Char
  • 2 weeks later...
JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

can someone please tell me asap if you can you use the rb25 head gasket with no dramas on the rb30 block, have searched but no definite answers i could find, thanks

need rb26 or rb30 gasket

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...