Jump to content
SAU Community

Recommended Posts

230-3095_IMG.jpg

this is what Dox's would look like if it had a turbo :)

230-3100_IMG.jpg

"And this is how you tickle a GTR"

231-3101_IMG.jpg

Taking off the front diff (is that what its called) to stop the front wheels from spinning (coz of AWD) on the dyno

231-3105_IMG.jpg

Wheels of the GTR go round n round... round n round

231-3106_IMG.jpg

This is about where I get woozy from all the exhaust gases and insane noise levels

231-3107_IMG.jpg

U-Law (like in the move "The One") eager to see how it's done

231-3108_IMG.jpg

Exhaust gas collector, and harnesses in case the car decided to launch itself it'd take the ramp with it.

231-3109_IMG.jpg

The monitoring PC with printer for handy dyno printouts

231-3110_IMG.jpg

Apparently not an emplyee of Dyno Dynamics, but Gerald from ICE (coz narks being a pedantic mofo)

Originally posted by funkymonkey

231-3108_IMG.jpg

Exhaust gas collector, and harnesses in case the car decided to launch itself it'd take the ramp with it.

231-3109_IMG.jpg

The monitoring PC with printer for handy dyno printouts

231-3110_IMG.jpg

One of the the guys from Dyno Dynamics

actually i believe thats gerald from ICE :)

231-3144_IMG.jpg

Almost got run over taking pics of Edwin's car by the R32 pulling out

231-3147_IMGb.jpg

Can't say no...

231-3149_IMG.jpg

The 180sx showed up too, making that a full representation of Nissan's import models (unless sumone has a laurel and a cefiro)

231-3152_IMG.jpg

Ahhh I love the smell of burnign rubber in the morning

231-3156_IMG.jpg

uLa32 n his buddies try out their newly aquired GTR belly tickling skills

dyno_dynamics.jpg

A big thanks to these guys for lettin me use their dunny (and for the dyno)

Twas a mad day for all... hope the captions were funny enough, if not... ignore em.



  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...