Jump to content
SAU Community

Recommended Posts

L20det complete original running motor Exedy heavy clutch short nose box all in very good condition

only mod is a high flow r34 turbo stainless split dump and front pipe all in perfect condition.$1500

L28 280ZX Turbo motor Reco P90 head new TO4ETurbo Dump pipe to suit F54 block new 5puc button clutch

280ZX Turbo box, Wolf3D ecu wiring for R30$2500 complete drop in motors with clutches boxes etc etc.

Both in very good condition no faults.

No silly offers may separate bits if enough interest but price will differ from complete set ups.

Selling to fund a different Enging combo

Make offers will deliver for fuel & time depends how far and convenience.

0415 346 073

Link to comment
https://www.sau.com.au/forums/topic/351840-l28l20-turbo-motors/
Share on other sites

Very interesting old dude,

I am not currently in the market, but will be in the future.

"high flow r34 turbo stainless split dump and front pipe all in perfect condition"

Would you consider selling this as a package? (Trade in for stock L20et Turbo and dump plus cash?)

Estimated or if known RWHP of each engine and what car they were in?

The L20et is out of a HR30 gt RWHP not much factory 144 this has bigger injectors

bigger turbo and split dump pipe so probably a bit more.Good thing its all original

and in excellent running order also the ECU will go with it along with all the Factory

Turbo stuff.

The L28et came out of a 280zx so all factory turbo stuff except injectors turbo dump

ECU new clutch ass might even throw in the same side inlets front mount and piping

Clutch Turbo head have only done a few hrs work this also was in the HR30 after the L20

but like i said I'm going a total different way and what ever i get for it all will be

put to that.As to RWHP 250+ maybe not really interest in figures as there not big enough

to talk about but plenty more than the L20 and when it boosts it's fun.

Edited by old dude

I plan to, just wondering how difficult making pickup longer is and if there's anything else involved.

Edit: Can standard ecu still be plugged in or have pinouts been changed?

Hydraulic lifters or solid?

Edited by Socrates

How difficult was sump swap?

Was only a case of elongating the oil pickup and bolting on a front facing sump?

It's not a biggie. My car's oil pick up (originally from a 260z???) has been cut, pointed in the opposite direction, and welded again to suit an 280zx sourced L28 with a C210 sump.

I can confirm that you will need to modify your oil pick up, but don't expect a major hassle. Better news, your front facing sump bolts straight up to the L28 block. The biggest hassle you might face is deleting one of your 2 dipsticks (a sawn-off dipstick should do the trick).

Again, from my experience, 144HP odd at the rear is going to feel like you're in a rocket compared to standard C210 arrangement... as for 250 plus... that's actually an awesome number, being near on double the factory output, but possibly waaaay more poke than the original C210 drivetrain and brakes are going to cope with for long. Fun though!

its 144 HP at the Flywheel.

My auto L24e with microtech was 74kW and went harder than a mates stock 5 speed L20et.

as for pinouts, each engine and series and release year and even continent has a difference or 2.

The later the release date the better, well nearly. You could get stuck with the ECCS with Oxy sensor and Cat convertor... meaning emissions compliant.

its 144 HP at the Flywheel.

My auto L24e with microtech was 74kW and went harder than a mates stock 5 speed L20et.

That's interesting!

My factory spec L20et 5 speed Paul Newman with it's 144HP, pulls up Mount's Ouseley & Kiera coming north from Wollongong @ 90kph in 5th without a care in the world with 2 up.

My old 7MGE MX83 auto Cressida couldn't do that with just me on board, unless I held it in 3rd to stop it jumping up to 4th & back to 3rd all the time.

And when I took it up the mountains the other week, it kicked ass going up Lapstone Hill off the end of M4 at Emu Plains.

Anybody that knows these roads in NSW can vouch that it is no mean feat.

Cheers, D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...