Jump to content
SAU Community

Recommended Posts

Hey SA SAUers,

New memeber on SAU, just wondering about a couple of things.

I am about to buy my dream car in an R32 GTR, however i will probably buy it from interstate... Just a little cheaper and much more variety. I m being quite picky in what i want.

Here is my question. How hard is the changover process from NSW, QLD, VIC plates to SA? If i buy a modified GTR how hard will it be to change the rego? What is the process? Does it go to regency and get thoroughly looked over just due to being a turbo jap car?

How much are we talking?

ANYONE OUT THEE PLEASE LET ME KNOW...

Cheers,

Matt

Will need to go for ID inspection within 90 days of being bought, Kinda like the 14 days of changing rego when you buy a car in SA. If during the ID inspection the inspector sees something he doesn't like, or something doesn't match, ie. engine numbers, you will be sent for a full inspection.

If everything matches up and the car is stock or not obviously modified, then they'll give you the all clear, then you go around the corner into the rego office and fill in the paperwork, pay the cash, and get your SA plates.

Thanks for the info mate

By inspector i assume you mean taking it to regency? How much is all the paperwork if it gets the all clear? Is the guy checking the car have any idea about modified cars? i mean im not going to show him a skyline with a 454 chev with a blower but how much do they know? How much mods can you hide or get away with? Sory bout all the questions just want to know to be safe and secure!!!

cheers

matty

When you buy a car from interstate you do the following:

- take car to Vehicle Identity Inspection Station/ID inspection(down the road around the corner from Vehicle Inspections) - if all the engine/chassis/rego/compliance numbers match up they give you a form of approval then you go to Transport SA and transfer the car to your name

- failing the above due to no compliance plate or mismatch engine/chassis number or they find any obvious defects then you will be sent to Vehicle Inspections(Regency) to have the car looked over - they WILL go through your car with a fine tooth comb - all illegal modifications will need to be removed

so all in all what you guys are saying is,...

As long as the car has no outrageous mods (massively too low, 20's, 1000db exhaust, etc,) and all the chassis/engine/compliance items line up, it all should be sweet?

anyone had experience with this??fill me in??? :thanks:

From my recent experience make sure anything obvious which is not stock is hidden or removed. That includes turbo timers, boost controllers, aftermarket BOVs, suspension, intake mods, loud exhausts etc. As well as an ID check they go over and look for basic defects.

Earlier this month I had to take the GTR through for an ID check and I was rejected twice – once for tint, having an engraved VIN rather than stamped and not having an English manual in the glove box. The second time they got me for having coilovers even though the first inspector told me they are fine. If they do find issues I found they like to only list a couple and once you get those rectified and go back they will point out a couple more. Basically make sure they can’t pick on anything.

Before you go, ensure the car has some form of valid registration or you will need a day permit from the motor registry. They will refuse to perform the inspection if you don’t have some form of valid registration or a permit and obviously you run the risk of being fined for driving an uninsured and unregistered car if you don’t.

If you are unsure and need more information ring Service SA and they will tell you everything you need to know.

they can be extremally pedantic about it also.. my wife bought a bog stock MX5 from melb and she took it thro for an ID check to get the rego trasnferred and they failed her because the window tint (which didnt look that dark at all really) was 7% too dark..... ffs.

had to peel it off and take it back.. what a waste of time

I bought a modified R33 GTR from Sydney and it took me 3 times to get it cleared. I dont know why they vcant do there job properly the first time. They let the pod filters pass because they were seure and they couldnt find the bost controller. Take it back to stock as far as you can get it and then go through regency and get it right the first time. My lesson learnt. Dont think that she'll be right they wont see that because they might

depending what state you purchase the car from and what imports regs it was brought in under you may have to basically re-complie the car again.....I found this out when bringing in an R32 GTR from Vic that was imported under the 15yo rule (didnt have the green plate).

  • 9 months later...

I am in a simliar situation to this. I just bought a V35, 20" wheels but legal (from what a tyre place told me) , my exhaust is loud & the window tint on the rear window is very dark. Not sure how I will go. Wondering if I may be OK as it is not one of the turbo models which I suspect they would pick on more. I also have a query regarding the Victorian Registration. Will it be cancelled & returned to the original owner? I have 4 months remaining & would prefer that money in my account not his :-)

Vehicle ID inspection is obviously not a full Regency but there are certain things that they look for which can and does trigger a full inspection, ie;

window tint

car too low

oil leaking everywhere - (steam clean the engine bay and underneath beforehand)

bald tyres - (or protruding from guards)

loose aftermarket pods - (secure them beforehand)

and probably many more obvious things

Took it down today. In & out really quickly, I had almost black window tint on the rear window, loud exhaust & big 20" wheels (legal from what I am led to believe) but the guy was really good & didn't even blink. NIce work

i went through this process 18months ago with my r34 GTT. i took out the boost controller, turbo timer, pod, put stockies on with plenty of meat, put the spoiler back on and gave it a good wash and vacuum. only mods i had on it when i went through was lowered suspension and a cat back trust exhaust (which wasnt that loud).

When i went in to get my inspection, there was a blue 33 gts-t up on the fkn hoist so i shat myself, pity he had a locked diff/straight pipes/stretched fitment etc.

If your car looks 90% stock and is clean, you will get through no dramas. If your buying interstate i would recommend you get a car that has the stock parts to change back to if you need.

They also checked my turbo to make sure it was standard.

Took it down today. In & out really quickly, I had almost black window tint on the rear window, loud exhaust & big 20" wheels (legal from what I am led to believe) but the guy was really good & didn't even blink. NIce work

they are only usually concerned about the front door windows..............Regency may think otherwise

they are only usually concerned about the front door windows..............Regency may think otherwise

unless its standard privacy tint, regency roadworthy may have an issue but for the most part ID guys are ok (even though ive seen a couple guys working at both)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Try looking at Eibacb/H&R springs Thats what Gary sourced for mine.
    • Hey y'all! I'm curious about how y'all go about widebodying your cars. I noticed that when running a square setup, my front wheels are a bit more tucked in than my rear wheels. Not by much, maybe 5-10mm. This leads me to wonder - when I widebody, should I use narrower front flares and wider rear flares? I found a set of 40mm rear flares that I really like, and was thinking of pairing them with some 18mm front flares, but I don't want the car to look strange. How have others done this? Note, I'm in a sedan. Thanks!
    • And if it was anything other than an auto tranny part, it might be a problem. But seeing as all auto trannies belong in the recycling bin, it's fine.
    • I have an R32 Fenix rad. It is good.
    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
×
×
  • Create New...