Jump to content
SAU Community

Recommended Posts

Hi this is a complete POWERFC D-Jetro kit for r33 and r32 GTR skyline (414BN026 Kit) it can be used on R34 GTR, R32 GTST (rb20) and R33 (rb25) with pin swaps.

This ecu will handle any mods you are likely to encounter, we have used these on std GTR's all the way up to 1000hp cars. This particular unit has done less than 5000kms and is off our workshop race car. The car has been split up to make way for another project which is not a RB engine so it is surplus to our needs.

It comes with both map sensors and harnesses, if you are going to use it on a RB20 or RB25 let me know and i will include a RB26 Air Intake Sensor too.

Being a tuner i can objectively say the POWERFC djetro is probably the best ecu you can buy for your GTR regardless of cost... hence why we used it in our own car.

CAN LOAD IT WITH A BASE MAP FOR THE WINNER TO DRIVE TO YOUR LOCAL TUNER FOR IF YOU SEND ME YOUR MODS (injector CC and turbos etc)

post-34927-0-51193700-1296646313_thumb.jpg

I have had a few questions regarding running it on a RB20 and RB25, the Re-pinning needs to be done on the engine loom (male ecu plug), i cannot do it on the ecu without soldering to the board etc which i prefer not to do as its hard to reverse neatly.

would you say this is better than a Haltech platnuim pro ? i was thinking going this instead but not sure?

Horses for courses i like both ecu's, TBH if i had to choose between those two it would be whatever suited my hip pocket.. as end results would be the same. Just finished tuning a haltech plat pro on a 3L which made 520rwkw on a std bottom end so it too is very capable.

post-34927-0-05160600-1296722879_thumb.jpg

trying to send you a PM but your inbox is full. I want to put a deposit on it!!!

How long till you can pay the lot? just that i have a few guys looking at it this weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...