Jump to content
SAU Community

Recommended Posts

the problem is all the catalogues list platinum plugs for skylines, hence the $20 per plug. so you need to know exactly what you want when you go in there because joe dickhead behind the counter is just gonna take his book as gospel and ignore anything you say.

as said, for a stockish 20 bcp6es or bcpr6es. can also use bkr6e is they dont have the others, or even any of those with 7 instead of 6, but they wont last as long.

Link to comment
https://www.sau.com.au/forums/topic/352906-spark-plugs/#findComment-5659461
Share on other sites

the problem is all the catalogues list platinum plugs for skylines, hence the $20 per plug. so you need to know exactly what you want when you go in there because joe dickhead behind the counter is just gonna take his book as gospel and ignore anything you say.

as said, for a stockish 20 bcp6es or bcpr6es. can also use bkr6e is they dont have the others, or even any of those with 7 instead of 6, but they wont last as long.

You cant use BKR6E, that is a Toyota spark plug and is 4 mm shorter than nissan.

Link to comment
https://www.sau.com.au/forums/topic/352906-spark-plugs/#findComment-5661485
Share on other sites

go to coventries and say u work for some company and get a trade discount, they don't seem to ask for proof if u sound confident

the last time i bought 6x plugs for my gtst is was around $16 including GST for 6!

Edited by jimmys-33T
Link to comment
https://www.sau.com.au/forums/topic/352906-spark-plugs/#findComment-5663596
Share on other sites

The spark plug is around 4mm shorter in the body and wont seat into the coil like the right spark plug would.

well there ya go, never knew that.

dont get -11s, unless you have a very good ignition system you'll have trouble with blowing out spark under full load

Link to comment
https://www.sau.com.au/forums/topic/352906-spark-plugs/#findComment-5664995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...