Jump to content
SAU Community

Tjs Build

TJR32GTS-T
 Share

Recommended Posts

TJR32GTS-T Proficient

TJR32GTS-T

Posted
Posted

ok here we go, i have just purchased a r32 gtst and am planning to do a few mods to her

my goal is to aim for about 250 at the treads.

this is my first import and is already my pride and joy

also note that i am still a NOOB to the import scene and patience with me would be greatly appriciated :)

here is a list of everything already on the car

-heavy duty exedy clutch

-big frount mount

-drift catch can

-HKS BOV

-Greddy 3stage boost controller

-hi cast lock

-cusco adjustable coilies

-adustable camber arms front and rear

-rb25 box with 1piece tailshaft ( goes in on thursday. cheers GT32)

- full stainless exhaust and dump pipe

-high flowed t28 turbo (i believe ball bearing?)

i have a rough idea of what i want to upgrade next, any feedback would be great

next on my list was;

-injectors

-fuel pump

-coilpacks

-ECU

now this is where i need your help as far as suggestions for parts / your similar setups / any items you have for sale ?

Cheers - Trent

ps pix will be up on this thread when i get down to the workshop on thursday

Link to comment
https://www.sau.com.au/forums/topic/353150-tjs-build/
Share on other sites
Crans Mentor

Crans

Posted
Posted

GTR injectors and resistor pack. Nistune ECU, Fuel pump 040 should do, Only change the coil packs if they are a problem.

3" Turbo back exhaust. And pretty sure you'll need to slightly bigger turbo.

Injectors should cost you no more than $300

Nistune $220 <- Fit it your self and pay around $500 - 800 for tuning

040 should cost around $200

Link to comment
https://www.sau.com.au/forums/topic/353150-tjs-build/#findComment-5661169
Share on other sites
TJR32GTS-T Proficient

TJR32GTS-T

Posted
  • Author
Posted

cheers for the info simon

*update* rb25 box is in and is smooth as silk

here are some pix of the box going in and some of the suspension set up

post-80927-0-55867600-1297336452_thumb.jpg

post-80927-0-45081400-1297336514_thumb.jpg

post-80927-0-18858000-1297336586_thumb.jpg

post-80927-0-39733100-1297336680_thumb.jpg

more pix will be up of the engine bay / wheels over the weekend

Link to comment
https://www.sau.com.au/forums/topic/353150-tjs-build/#findComment-5665247
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...