Jump to content
SAU Community

Recommended Posts

GTR R33 alternator near new $70

Blitz boost control $350

HKS gauges and pillar (oil temp, Boost and Volts gauges) $400

1 CAS RB26 $250

G reddy single turbo Dual airflow MTR intake fitting $200

R33 GTR Gear box good condition $800

RB26 Short HKS 40thou forged pistons after market forged rods needs crank matching block to pistons in good condition $1100

Hoosier tyres 18x-275-35zr 40% tread good grip R spec tyres $400

R33 GTR gear box mounts $50 each

RB 26 ignition igniter $200

R33 GTR gear stick with carbon gear stick knob $100

R33 GTR Air bag 95-96 $100

Various elbows turbo pipes from $60 HKS and Greddy

Starter Motor R33 GTR $60

R 33 GTR clock for 4 wheel steer fits under steering wheel $200

G reddy injectors 2 set 660 cc $400 PER SET good condition

More pictures on a seperate post as i cannot load more than 10 with the new SAU site

post-50630-0-56230300-1297133009_thumb.jpgpost-50630-0-32084500-1297133013_thumb.jpgpost-50630-0-24209300-1297133017_thumb.jpgpost-50630-0-38322400-1297133021_thumb.jpgpost-50630-0-92177600-1297133024_thumb.jpgpost-50630-0-29449700-1297133029_thumb.jpgpost-50630-0-59642400-1297133032_thumb.jpgpost-50630-0-89981800-1297133035_thumb.jpgpost-50630-0-80012300-1297133038_thumb.jpgpost-50630-0-04178300-1297133042_thumb.jpg

post-50630-0-22878000-1297132887_thumb.jpg

post-50630-0-12374600-1297132902_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/353243-rb26-and-r33-gtr-bits/
Share on other sites

GTR R33 alternator near new $70

Blitz boost control $350

HKS gauges and pillar (oil temp, Boost and Volts gauges) $400

1 CAS RB26 $250

G reddy single turbo Dual airflow MTR intake fitting $200

R33 GTR Gear box good condition $800

RB26 Short HKS 40thou forged pistons after market forged rods needs crank matching block to pistons in good condition $1100

Hoosier tyres 18x-275-35zr 40% tread good grip R spec tyres $400

R33 GTR gear box mounts $50 each

RB 26 ignition igniter $200

R33 GTR gear stick with carbon gear stick knob $100

R33 GTR Air bag 95-96 $100

Various elbows turbo pipes from $60 HKS and Greddy

Starter Motor R33 GTR $60

R 33 GTR clock for 4 wheel steer fits under steering wheel $200 sold 1 r33 gtr mount . 2 left 1 is r33 gtr 1 is r34 gtr

G reddy injectors 2 set 660 cc $400 PER SET good condition

More pictures on a seperate post as i cannot load more than 10 with the new SAU site

post-50630-0-56230300-1297133009_thumb.jpgpost-50630-0-32084500-1297133013_thumb.jpgpost-50630-0-24209300-1297133017_thumb.jpgpost-50630-0-38322400-1297133021_thumb.jpgpost-50630-0-92177600-1297133024_thumb.jpgpost-50630-0-29449700-1297133029_thumb.jpgpost-50630-0-59642400-1297133032_thumb.jpgpost-50630-0-89981800-1297133035_thumb.jpgpost-50630-0-80012300-1297133038_thumb.jpgpost-50630-0-04178300-1297133042_thumb.jpg

GTR R33 alternator near new $70

Blitz boost control $350

HKS gauges and pillar (oil temp, Boost and Volts gauges) $400

1 CAS RB26 $250

G reddy single turbo Dual airflow MTR intake fitting $200

R33 GTR Gear box good condition $800

RB26 Short HKS 40thou forged pistons after market forged rods needs crank matching block to pistons in good condition $1100

Hoosier tyres 18x-275-35zr 40% tread good grip R spec tyres $400

R33 GTR gear box mounts $50 each

RB 26 ignition igniter $200

R33 GTR gear stick with carbon gear stick knob $100sold air flow meters

R33 GTR Air bag 95-96 $100

Various elbows turbo pipes from $60 HKS and Greddy

Starter Motor R33 GTR $60

R 33 GTR clock for 4 wheel steer fits under steering wheel $200

G reddy injectors 2 set 660 cc $400 PER SET good condition

More pictures on a seperate post as i cannot load more than 10 with the new SAU site

post-50630-0-56230300-1297133009_thumb.jpgpost-50630-0-32084500-1297133013_thumb.jpgpost-50630-0-24209300-1297133017_thumb.jpgpost-50630-0-38322400-1297133021_thumb.jpgpost-50630-0-92177600-1297133024_thumb.jpgpost-50630-0-29449700-1297133029_thumb.jpgpost-50630-0-59642400-1297133032_thumb.jpgpost-50630-0-89981800-1297133035_thumb.jpgpost-50630-0-80012300-1297133038_thumb.jpgpost-50630-0-04178300-1297133042_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...

GTR R33 alternator near new $70

Blitz boost control $350

HKS gauges and pillar (oil temp, Boost and Volts gauges) $400

1 CAS RB26 $250

G reddy single turbo Dual airflow MTR intake fitting $200

R33 GTR Gear box good condition $800

RB26 Short HKS 40thou forged pistons after market forged rods needs crank matching block to pistons in good condition $1100

Hoosier tyres 18x-275-35zr 40% tread good grip R spec tyres $400

R33 GTR gear box mounts $50 each

RB 26 ignition igniter $200

R33 GTR gear stick with carbon gear stick knob $100

R33 GTR Air bag 95-96 $100

Various elbows turbo pipes from $60 HKS and Greddystarter motor sold

Starter Motor R33 GTR $60

R 33 GTR clock for 4 wheel steer fits under steering wheel $200

G reddy injectors 2 set 660 cc $400 PER SET good condition

More pictures on a seperate post as i cannot load more than 10 with the new SAU site

post-50630-0-56230300-1297133009_thumb.jpgpost-50630-0-32084500-1297133013_thumb.jpgpost-50630-0-24209300-1297133017_thumb.jpgpost-50630-0-38322400-1297133021_thumb.jpgpost-50630-0-92177600-1297133024_thumb.jpgpost-50630-0-29449700-1297133029_thumb.jpgpost-50630-0-59642400-1297133032_thumb.jpgpost-50630-0-89981800-1297133035_thumb.jpgpost-50630-0-80012300-1297133038_thumb.jpgpost-50630-0-04178300-1297133042_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A HICAS fault really should not cause the engine to go into limp mode. These cars are so old that the systems barely talk to one another. The thump might be the lockoff solenoid valve for the HICAS (the safety valve) getting closed, to lock the rear wheels "straight". I say "straight", because when my HICAS used to shit itself before I took off and nuked it from orbit, it would lock up with the rear wheels wildy non-straight and you'd need 45° of steering wheel to drive straight. Take off and nuke it from orbit. First step is to pull the smaller of the two plugs out of the HICAS CU. See if it stops misbehaving. You can also (whilst leaving it plugged in) try to get the HICAS CU into diagnostic mode by doing the pedal dance, or by connecting a CONSULT capable diagnostic reader into the car and seeing what it has to say for itself. Can't do either of these with it unplugged though. 1st gen HICAS is a ballache. I would do a complete delete. I did do a complete delete.
    • Ah. I dunno why, but I skim read your earlier post and thought the manual switch was to force it on, not force it off. I'd be tempted to have both. So, your two in series, and another in parallel with those. Or, a master arm switch, followed by the manual force on and the thermo in parallel. 6 and 2 3s.  
    • Yeah been doing it in an x shape. Do you reckon it's worth putting guide coat early where the filler isn't sanded down completely smooth? Reason I ask is because as I'm sanding it one part might be level which I don't need to sand anymore but the other part might be high so I can just focus on that instead of sanding across the whole repair area. I wonder if the putty is too thin, though the area is almost completely smooth before I do it as I've already put filler prior.
    • Just 2, and inline. One switch temp related other switch driver controlled.   I'm nearly in my head back to Arduino land for it...
×
×
  • Create New...