Jump to content
SAU Community

R32 Gts-T And Gtr Front Indicators

mmarschall
 Share

Recommended Posts

mmarschall Enthusiast

mmarschall

Posted
Posted

Hello everyone!

Im back home in Australia again (in japan teaching most of the year for the last 4 years).

After a lot of requests last time i filled all the spare room in my suitcase with R32 GTS-T clear indicators (the factory ones, not aftermarket!)

Also quite some bits still here from my past trips home. Cant find the old thread link anymore.

Important- R32 GTR and GTS indicators are NOT interchangeable (different size, GTR ones fit the wider guards).

pic of the whole GTS lot. Close ups of each below.

post-21158-0-96930200-1297557543_thumb.jpg

Pair 1, excellent condition, clean with all mounting points, no cracks in them, No bulbs/loom. $145 (pair)

post-21158-0-24701700-1297557605_thumb.jpg

Pair 2, excellent condition, clean with all mounting points, no cracks in them, Includes bulbs/loom. $150 (pair)

post-21158-0-96185300-1297557626_thumb.jpg

Pair 3, Crap condition - please see pic. both have a small area with what appears to be glue? Would be fine for a drifter etc. $65 (pair)

RHS(driver) has small cracks + missing side point.

LHS(passenger) top mounting is there but damaged (missing small section) Would suggest using a washer when mounting.

post-21158-0-51110100-1297557641_thumb.jpg

Single Passenger side LHS, Top mounting tab has a small split. Would suggest using a washer when mounting. $60

post-21158-0-66958700-1297557661_thumb.jpg

3x Drivers side (RHS) please see pic.

5- Excellent condition with loom and bulbs $75

6- Excellent condition, small glue spot on back of top black edge strip. with loom/bulbs $65

7- Excellent condition, no loom or bulbs. $65

post-21158-0-11518600-1297557682_thumb.jpg

Postage:

Pickup is welcome from Kyogle 2474. Or i can post them $8 in NSW or $12 interstate. Registered post(includes insurance/tracking number).

I have tried to describe them as best and as honestly as i can. Please email or PM if you would like close up photos. Bulbs have NOT been tested.

Email will always get my attention and i will try check the thread daily. If the thread is getting old please email as i will be back in japan in 2 months (early april).

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

and other leftovers list:

HKS water temp gauge with wiring and sensor $80 Small ding on edge of metal surround (please see pic)

post-21158-0-39668300-1297559384_thumb.jpg

Z32 JDM AFMs

$200 With pod and plug/wire removed from R32 GTS-t

$150 with plug/wire in excellent condition (NOT the cheap copies on ebay)

$90 Purchased from a wrecker in japan as "tested working" however the mesh is damaged.

post-21158-0-87039700-1297560505_thumb.jpg

R32 GTR indicators $75 each - have made close ups of each, please PM your email address and ill send them to you.

post-21158-0-16455800-1297560567_thumb.jpg

R32 GTS indicators- orange drivers side x3 (people seem to crash on the passenger side more!?) $40 each

post-21158-0-14703900-1297561783_thumb.jpg

And GTR (R32 and R33) triple gauges... I bought a whole bunch of these back some time ago. $50-$120

The R33 GTR has a torque split gauge so is not really suitable for RWD cars but they have carbon fiber style surrounds and do look cool.

Again i can send/upload close up pics of each if anyone's interested in these. The one odd big one is a R34 GTT dash center console top unit.

post-21158-0-34369500-1297561934_thumb.jpg

Thanks for looking! :)

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

Link to comment
https://www.sau.com.au/forums/topic/353758-r32-gts-t-and-gtr-front-indicators/
Share on other sites
  • 3 weeks later...
  • 5 months later...
mmarschall Enthusiast

mmarschall

Posted
  • Author
Posted

Hey mate, still got a passenger side gtst one for loom ??

wow, thread back from the dead!

and yes sir, loom with plugs/bulb sockets available and most the other items are still here + more bits brought back on this trip!

Please email me ([email protected]) if you would like photos. $10 for one (or free with an indicator!)

I will be here in Aus until the 29th of this month (29/09/11) after that i will be back in japan teaching again for 4 months but can ask my father to post anything if needed.

kind regards,

martin

  • 3 weeks later...
  • 2 weeks later...
fresco1984 Rookie

fresco1984

Posted
Posted

hi mate i need a pair of indicators (pair 2) in excellent cond to pass a rwc i have had alot of dramas with trying to find a pair to pass rwc plz text me on 0435837997 (ray) if you have any i know where i can get a pair asap

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...