Jump to content
SAU Community

Recommended Posts

Hi everyone,

Had my lovely silvia (its got an r32 silvertop motor in it) die on me last week out of the blue. It started then i reversed out and it stopped. And wouldnt start again. Now when i turn the key it turns over fine and kinda fires poorly twice then just winds over for infinity. If you turn the key off then try again it does the same pattern. I checked that i had fuel pressure in the rail and i did. Ive checked the ECU for fault codes but it came up with the one for all OK. Ive check all the fuses inside and in the engine bay and theyre all good. Ive tried to check the ignitor by unplugging it on the ecu side and checking it with a test light. No light from any pinout while the motor is turning over.

Basically was wondering if anyone has some spare electrical bits i can swap in and out to try and diagnose the problem. Im looking for an ECU and an ignitor box for now, maybe a CAS too? Or if anyone else has any other suggestions for stuff i can check Im open to that too. Beverages will be supplied to those who can help me out with parts. I can come and get them after hours from anywhere in Canberra.

Numbers on the ECU:

Big 23

23710 04U12

Failing this im going to send the ecu and ignitor to Injectronics to have them tested. But thats kinda swinging in the dark and probably wasting money. Any help would be much appreciated!

Thanks,

James

hey james, i got a igniter you you can have. i just need to find it lol

send us a pm with your details, i we'll sort it out.

hows the hr going?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...