Jump to content
SAU Community

Recommended Posts

Hey guys

Just letting you all know that there will be an afternoon sprint session @ Queensland Raceway next Wednesday on the 23rd

If you have ever wanted to drive your car fast without the worries of getting a speeding ticket then you should come!

Costs are as follows

Entries $135.00

Late Entry Penalty $100.00

Annual AASA Clubman Licence $55.00

AASA Clubman Day Licence $20.00

Licence Application form must be attached

Helmet Hire (Deposit Required) $5.00

The Sprints are pretty safe! Your basicaly aiming for the best lap time you can do!

For those of you who dont know this is nothing like touring car racing, all cars have a gap between them with the idea being to let the faster car go past you

Would be good to see some other V35s out there other than my own! Im interested to see what times those of you in 6 speeds would pull

Link to comment
https://www.sau.com.au/forums/topic/353931-qr-sprints-next-wednesday-arvo-23rd/
Share on other sites

Hey guys

Just letting you all know that there will be an afternoon sprint session @ Queensland Raceway next Wednesday on the 23rd

If you have ever wanted to drive your car fast without the worries of getting a speeding ticket then you should come!

Costs are as follows

Entries $135.00

Late Entry Penalty $100.00

Annual AASA Clubman Licence $55.00

AASA Clubman Day Licence $20.00

Licence Application form must be attached

Helmet Hire (Deposit Required) $5.00

The Sprints are pretty safe! Your basicaly aiming for the best lap time you can do!

For those of you who dont know this is nothing like touring car racing, all cars have a gap between them with the idea being to let the faster car go past you

Would be good to see some other V35s out there other than my own! Im interested to see what times those of you in 6 speeds would pull

What time? How many laps you do, is it something you can do with daily 19" 245 / 285 tyres?

What time? How many laps you do, is it something you can do with daily 19" 245 / 285 tyres?

Sprint Check In 11.00am - Briefing 12.00pm - On Track 12.30pm

As for laps, Wednesday sprints are usually less busy than Saturday sprints

You normally get 5 hot laps there is also 1 warm up lap and 1 cool down lap in each session

Each group will normally get 4 sessions 3 timed ones and 1 un-timed one where you can take a passenger out

Yes you can take out your regular daily rims/rubber I did the 1st 4 times on those exact same sizes before I decided to take the plunge and buy some track rims/rubber

entry form can be found here

just make sure that you pay up before mondy to avoid the late fee\

http://www.queenslandraceway.com.au/pdf/e_2011%20MS.pdf

Sprint Check In 11.00am - Briefing 12.00pm - On Track 12.30pm

As for laps, Wednesday sprints are usually less busy than Saturday sprints

You normally get 5 hot laps there is also 1 warm up lap and 1 cool down lap in each session

Each group will normally get 4 sessions 3 timed ones and 1 un-timed one where you can take a passenger out

Yes you can take out your regular daily rims/rubber I did the 1st 4 times on those exact same sizes before I decided to take the plunge and buy some track rims/rubber

entry form can be found here

just make sure that you pay up before mondy to avoid the late fee\

http://www.queenslan...e_2011%20MS.pdf

Dunno if i can get it off work, when is the next wednesday?

Hey guys well seems none of you were able to make it today... Ill post up details of when the next one is so you all have more time to sort out work/ your cars

More PBs today

Got my Sprint time down to a 102.02 and probally would have gone faster in the 2nd session if it wasent for the fact that the owner of a supercharged 350Z asked if I would like to drive his car in the 2nd session :thumbsup: which was an offer I could not refuse.

Funny enough I did a faster time in my V35 than the supercharged Z but still managed to do a quicker time than its owner pulling a 102.89 over its owners 103.58

After driving the Z I so need to do an upgrade on my brakes... The Z was running brembos but with different discs, pads and braided lines. They just kept working weather it be the 1st lap or the last, unlinke my POS single piston calipers with slotted discs that one of them later cracked later on in the day. I changed pads to some QFM pads that were supposed to be as good as the Ferodo DS2500 however it felt like I was mashing my foot into a sponge by the 3rd lap!

Clubman time was a PB of 105.18 which was quicker than a BMW M3 coupe :)

Cracked rotor :*(

Didnt u already crack your rotor?

Cant help you with brembos but i got prices for stoptech front and back pads (130-140inc post), F + B braided stoptech lines (115-125 inc post), front and back stoptech slotted rotors (640 inc post) from what i remember

Will have to confirm but im wanting to combine postage.. I got my pads already, just wanting other stuff. Same with coilovers and camber kit, email me for info, i think 299 for front and 199 for rear (hard race) non-pillow joint so no squeek.

I want to do a track day but wondering if i should upgrade all my shit first...

I had some small surface cracks showing on the disc which arent a problem. However when the crack goes to the edge of the disc thats when its time to panic and get it changed ASAP!

My rear rotors and pads are fine "the front dose 80% of the work anyway." What would I be looking @ to get some front rotors? bare in mind that mine will be different to yours being poverty spec non brembo

I may as well get the braided lines to

Has Just jap sorted out the hard racing camber arms yet? Id be keen to get those on the car before the next track day

I allways think its good to take your car out as it is to set a benchmark. That way you can see that spending $$$$ on whatever shaved X seconds off your lap time which dosent make you feel as bad about spending the $$$$ :)

if its going to take 6 weeks I may have to give the front discs a miss as I need to change them ASAP before the cracked one explodes on me..... :rant: I am still keen for the braided lines however

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...