Jump to content
SAU Community

Recommended Posts

Here is our selection of brand new HDI(Hybrid development International) Intercoolers and kits.

HDI are very well known in Australia and for the quality of their Front mount kits and EBC's.

Why choose HDI? Check these vids for a few reasons....



- The link next to each item below will take you to our site where you can view pics & details and where you can purchase and pay via paypal with our secure online checkout system.



INTERCOOLER KITS:

R34.jpg

HDI GT SPEC INTERCOOLER KIT SKYLINE R32-R33-R34 - DISCONTINUED.
FITS R32 GTST - R33 GTST - R34 GTT
- Core Size: 600x300x78
- Overall size 800x300x78(including end tanks)
- 3"Inlet & 3"Outlet - Polished Finish
- low pressure drop 0.2psi at 15psi
- strong tube and fin design
- tested for up to 80psi (around 800hp)
- plumbing made from mandrel bent aluminium with chrome polished silver
- comes with all necessary mounting brackets, 3 layer silicon joiners and t-bolt race clamps.
- 12 month warranty

GTS%20GTspec.jpg

CLICK HERE FOR THE INSTALL GUIDE

HDI GT SPEC KIT DYNO TESTED ON R33 GTST.......



-------------------------------------------------------------------------------------------------------------------------

HDI GT2 INTERCOOLER KIT SKYLINE R32-R33-R34 - AU$600.00 delivered Addtocart.gif
FITS R32 GTST - R33 GTST - R34 GTT
- Core Size: 580x285x78
- 2.75"Inlet & 2.75"Outlet
- Polished Finish
- low pressure drop
- strong tube and fin design
- Good for up to 900hp
- plumbing made from mandrel bent aluminium with chrome polished silver
- comes with all necassary mounting brackets, silicon joiners and hose clamps.
- 12 month warranty

IK-GTS-GT2-SHB.JPG

CLICK HERE FOR THE INSTALL GUIDE

-------------------------------------------------------------------------------------------------------------------------


INTERCOOLERS:

intercooler2.jpg

HDI GT SPEC FRONT MOUNT INTERCOOLER (600x300x76mm) - DISCONTINUED.
- Core Size: 600x300x78
- Overall size 800x300x78(including end tanks)
- 3"Inlet & 3"Outlet
- Polished Finish
- low pressure drop 0.2psi at 15psi
- strong tube and fin design
- tested for up to 80psi (around 800hp)
- Universal fit
- 12 Month warranty

GT%20spec.jpg

-------------------------------------------------------------------------------------------------------------------------


HDI GT2 FRONT MOUNT INTERCOOLER (580x285mmx78mm) - AU$440.00 delivered - Addtocart.gif
- Core Size: 580x285x78
- 2.75"Inlet & 2.75"Outlet
- Polished Finish
- low pressure drop
- strong tube and fin design
- Good for up to 900hp
- Universal fit
- 12 Month warranty

GT2%20INTERCOOLER2.JPG

-------------------------------------------------------------------------------------------------------------------------


More info on HDI Intercoolers & components.......

INTERCOOLER2.jpg INTERCOOLERkit2.jpg SILICON%20HOSE2.jpg SUPER%20CLAMP2.jpg

Sorry, no pick-up for these items.

Please PM or contact us if you have any questions regarding these items.

Cheers,
Paul. smile.gif
www.performance-wise.com
www.performance-wise.net
www.yellowjacketscoilpacks.com
Link to comment
https://www.sau.com.au/forums/topic/354153-hdihybrid-intercoolers-kits/
Share on other sites

  • 2 weeks later...

no charge for post

The Post costs are included in the prices.

If anyone wants to pick up then I can knock $50 off the price of a kit and $30 off the price of a cooler.

:cheers:

  • 1 month later...

Hey mate, does the R32 kits also fit R32 GTR?

Cheers

Unfortunately not sorry. I do however have some other kits for the R32 GTR which are listed on my site - see here

:cheers:

  • 6 months later...

The Post costs are included in the prices.

If anyone wants to pick up then I can knock $50 off the price of a kit and $30 off the price of a cooler.

:cheers:

So if i where to pick up the gt intercooler kit how much would it be and does it fit in r32. Gtst?

So if i where to pick up the gt intercooler kit how much would it be and does it fit in r32. Gtst?

It will fit the R32 GTST but we dont offer pick-up any more sorry.

:cheers:

  • 1 year later...

I have the HDi GT2 kits for the S14 and they are $620 delivered.

They are listed in my site here - http://www.performance-wise.com/USERIMAGES/procart12.htm

Some areas will need to be trimmed to fit this kit. Heres a basic copy of the installation manual - http://photos.imageevent.com/kadepunk/hybridinstallationguides/S1415%20instruction%2004.pdf

:cheers:

  • 5 months later...


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...