Jump to content
SAU Community

Recommended Posts

Xmas specials

- Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW & Custom Braided lines oil restrictor and custom turbo drain etc

Also comes with new 19psi actuator, and hks alloy hard out let elbow to suit. $1700

- Trust Side mount intercooler (uses short piping and goes back into stock piping) $350

- Z32 AFM with plug $200

- SARD 850cc side feed injectors in rail with clips and loom all soldered in $750

- Yellow Jackets coil packs $280 suit r33 series 2

- Apexi Power fc + Apexi Commander with 300kw tune $1300 suit r33

- BLITZ Sbc ID3 SPEC-S Electronic Boost Controller $350

- Nismo 400r Sideskirts suit r33 $200

- Rda slotted rotors & QFM-k750 hight temp pads $400

For sale:

- Nintendo DS Lite, black, brand new unwanted/not needed prize - $100

- HICAS unit, came off a 1998 R33 Series 2 - $50

Also got:

BenQ E2200HD - near new condition - $100

has HDMI input, 22" widescreen, built in speakers etc

benq-e2200hd-monitor.jpg

Up for sale is my 1995 R33 Series 1.5 Mspec 5sp manual makes 300kw on 18psi

Will make 350rwkw easy with more boost and e85

Price: $19,500 ono

Modifications:

Stock internally rb25det series 2 engine

- Tomei adjustable exhaust cam

- Garrett GT35 Turbo with 0.5 front cover and 0.82 rear IW

- Hpi stainless exhaust manifold

- Metal exhaust gaskets

- Custom Braided lines and turbo drain

- 3.5 "Bell mouth dump front pipe

- 3" Stainless Mandrel Bent Magnaflow cat back exhaust

- 3" Decat

- Silicon Hard intake pipe

- Pod Filter

- Silicon hoses and lines

- Trust FMIC

- Z32 AFM

- SARD 850cc injectors

- Yellow Jackets coil packs

- Bosch 044 fuel pump

- Apexi Power fc + Apexi Commander

- BLITZ Sbc ID3 SPEC-S Electronic Boost Controller

- Exeddy Gtr Cerametallic Clutch Kit

- Lightened Chromolly Fly wheel

- Pro-Stopper Series 5 Alarm

- Triplex Immobilizer

- Head Unit - Eclipise 50x4 CD5444 CD/MS Receiver with MP3/ATRAC3

- Pioneer 6" 4way 280watt fronts

- Kenwood 7x10's 350watts

- Nismo 400r Sideskirts

- Nismo Clear Side indicators

- Kenwood 600w Amplifier

- Kenwood 600 sub

- KYB Coil Overs

- 18" x 9.5 Dtm rush wheels stretched 235's front, 255's rear

- 20% Tinted Windows

- Twin K&N oil breathers

- Water methanol injection

- Rda slotted rotors

- QFM-k750 hight temp pads

- Custom engineered hicas lock system

post-31991-1259112659_thumb.jpg post-31991-1259112677_thumb.jpg post-31991-1259112687_thumb.jpg post-31991-1259112698_thumb.jpgpost-31991-1259112760_thumb.jpg post-31991-1259112837_thumb.jpg post-31991-1259112876_thumb.jpg

Now 16.5K with stock r33 wheels with semis

r33 series 1 after market front grill (GTR style like the one Talbo was selling a while ago but with the screw tabs)

currently the grill is painted in Wine red

$40 or swap for a standard series 1 grill that is painted black

r33 series 1 coilpacks $120 ono

Danai 0402541975

For sale:

stock r33 dump & front pipe - $30

stock r33 rims and tyres - 2 off - $25 each

r32 seats rear - $250

r32 seats front - $250

r32 gtr gearbox - $500 ono

pickup

DSC00449.jpg

DSC00448.jpg

gearbox says HXB Nabco japan

pretty heavy tbh, lol. no knees, I could feel it :banana:

DSC00444.jpg

DSC00445.jpg

DSC00446.jpg

Xmas specials

- Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW & Custom Braided lines oil restrictor and custom turbo drain etc

Also comes with new 19psi actuator, and hks alloy hard out let elbow to suit. $1700

- Trust Side mount intercooler (uses short piping and goes back into stock piping) $350

- Z32 AFM with plug $200

- SARD 850cc side feed injectors in rail with clips and loom all soldered in $750

- Yellow Jackets coil packs $280 suit r33 series 2

- Apexi Power fc + Apexi Commander with 300kw tune $1300 suit r33

- BLITZ Sbc ID3 SPEC-S Electronic Boost Controller $350

- Nismo 400r Sideskirts suit r33 $200

- Rda slotted rotors & QFM-k750 hight temp pads $400

Damn i cant pm yet, but my afm is green and im pretty sure 1993 would be series one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...