Jump to content
SAU Community

Recommended Posts

FS - Both to Suit R32 GTR/GTS4

Set of 4 Tein HR Coilovers - $600

- Non height or damper adjustable

- Street Legal Height

- Stiff as F**k

Very stiff shocks that happen to be street legal (barely - eyebrow height is spot on)

Set of 4 Bilstein Coilovers - $600

- Non height or damper adjustable

- Marginally softer than the teins, but still very stiff

- Lower than legal, handles a bit better than the teins (imho)

Reason for sale - replaced shocks with damper adjustable nismo shocks and need cash to rebuild xfer case ;P

PM for details, no time wasters please.

-D

Here I have for sale a 12inch Pioneer boxed sub with ports. Will throw in a free shitty amp. Everything works perfectly. $50

Also have Velo sidemount brackets which weigh 1.5kg the pair. Virtually brand new, only selling because they were too narrow for my my fixed back. These are $90 brand new, Im selling them for $50.

No bullshit please. Pickup Adelaide.

Contact me on 0416942503. No text messages

img0040mj.th.jpg

img0042h.th.jpg

img0041uj.th.jpg

img0056na.th.jpg

Sorry for the bad pics

Greddy Catch Can(breather holes drilled in back) $50

R33 series 2 Manual Dash Cluster 136,000km $70

R33 series 2 Dash/Crash Pad Perfect Cond $50 (just dusty in pics)

R33 series 2 Manual radiator $100

R33 Series 2 Air con Condenser $50

R33 Air con compressor $50

180sx Vented Bonnet $200

R32 GTR Trust Jasma Exhaust, heat-wrapped front pipes right back inc cat, ok cond small hole on 1 of the welds, (has had chopped and changed hot dog at some point),(DB Passed regency 88) $250

180sx front fenders metal, rubbed back but changed mind and bought frp, $100 pair pictured on 180sx

Pick up Northern Suburbs or Regency area

0413 247 219 or PM

Jason

102_0422.jpg

IMG_0159.jpg

IMG_0037.jpg

IMG_0036.jpg

IMG_0026.jpg

Hey Guys up for sale is my Pocket Bike,

I bought this just over a year ago intending to race it but soon after bought my first skyline and have been putting all my cash towards her :)

Specs:

Fatboy exhaust system

Firberglass carby read Valve

Advaned timming key

Hydrolic front and rear brake system, with ventelated rotors

Semi soft qualifying tyres with plenty of meat left

Aftermarket handle gips with engine cut off switch

Coustom decals on fairings

Overall the motorbike is in great condition, fairings have a few scratches here and there but not noticable,the only problem with the bike at the moment is one of the clutch springs have gone so it will prob need a new clutch (bout twenty bucks from the brick works bear and bike shop). The bike in total with all the modifications and upgrades has cost me just under five hunder bucks,

but i am looking for a quick sale before xmas.

Price : $120 ono

I also have some 32 parts

- smic with some piping in good condition $30

- standerd rear camber arms $30

- standard r32 turbo charger im great condition $100

Pics

post-59106-0-51586900-1292910893_thumb.jpg

post-59106-0-02250200-1292910912_thumb.jpg

post-59106-0-65790200-1292910929_thumb.jpg

post-59106-0-83765600-1292910948_thumb.jpg

Contact me via Pm im Always on :)

Cheers joe

Will swap for item of interest.

Edited by r32gtr92

Greddy Catch Can(breather holes drilled in back) $50

R33 series 2 Manual Dash Cluster 136,000km $70

R33 series 2 Dash/Crash Pad Perfect Cond $50 (just dusty in pics)

R33 series 2 Manual radiator $100

R33 Series 2 Air con Condenser $50

R33 Air con compressor $50

180sx Vented Bonnet $200

R32 GTR Trust Jasma Exhaust, heat-wrapped front pipes right back inc cat, ok cond small hole on 1 of the welds, (has had chopped and changed hot dog at some point),(DB Passed regency 88) $250

180sx front fenders metal, rubbed back but changed mind and bought frp, $100 pair pictured on 180sx

Pick up Northern Suburbs or Regency area

0413 247 219 or PM

Jason

Catch Can and Cluster SOLD

Hi guys

just some random stuff for sale, all been sitting in the shed, figure its time to clear them out

Pair of R33 front calipers, bought them to fit to my 31, only had 280mm discs on it, so bought R32 calipers instead $200ono

1001424r.th.jpg

Set 17" BASEL Mesh Rims, came on my 33, bought Equips, these are now surplus $400 for the set

fronts are 8" + 36 with no tyres

rears are 9" +36 with 255/40 (60% tread)

1001425j.th.jpg

1001415.th.jpg

1001423m.th.jpg

Set of 16" Old Works from my 31, upgraded brakes, didnt clear front calipers, were just my skid rims $150ono

all round 7 +27 2 have tyres average yet legal tread, 2 come tyreless

1001426p.th.jpg

New in wrapping drift lip spoiler. bought for the 33, decided i like the factory look, $120ono

1001422p.th.jpg

also got a pair of Kenwood 12" Subs in a box, were in my Jag, dont need them anymore $150

box is uncarpeted and painted black, and i think there is a cheap amp on top which will come with the subs if it is there

and some Dominator speakers 6x9, appanrently over 200w, cheap things a bought from autobarn, brand new unopened box, $20

All parts located in Holden Hill, can deliver if need be

Call or msg me on 0402565077 or pm me

Cheers Bengi

FOR SALE

R32 GTR Calipers (Painted Gold)

Front $150

Rear $50

RDA Slotted Rotors to suit R32 GTR (non Brembo)

$200 a pair

296mm front

280mm rear

I have both front and rear, they have never been tracked. haven't even had them long enough to be needing machining.

Plenty of thickness left!

Alpine CDA-9887 Headunit with iPod control cable still for sale!

http://www.skylinesaustralia.com/forums/topic/347877-alpine-cda-9887-headunit-ipod-nano-8gb/page__p__5596094#entry5596094

$200 if you pay and pick up today/tomorrow/Friday/before Christmas! Pick up at Ottoway, near Port Adelaide.

for sale any sbc guys here

ok all you sbc lovers :-)

i have for sale the following

a msd 6al unit

a msd pro billet distributor part number 85551

a msd master blaster 2 coil

it's secondhand but in great working condition

asking price is $475.00 ono.

.

pm me on here if you have any questions

merry christmas

dean

Pocket Bike Has Now Been Sold :)

I also have some 32 parts

- smic with some piping in good condition $30

- standerd rear camber arms $30

- standard r32 turbo charger im great condition $100

Contact me via Pm im Always on :)

Cheers joe

Will swap for item of interest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...