Jump to content
SAU Community

Recommended Posts

Running out of time to pay for parts on hold so...

I have

2x Stanton T.60 vinyl decks with cords and slipmats (got them 2nd hand off ebay 6 months ago)

2x Ortofon Om Pro S scratch/mix cartridges with new Stanton Headshells (brand new 6 months ago)

1x Audioline 4ch mixer (dmix4sp) with cords (brand new 6 months ago)

10x jungle/drumn'bass vinyl

old pair of headphones

record cleaner

old cartridge and headshell 1x

All items in good condition only used the setup a dozen times and is now in boxes under a spare bed

All you will need is an amp and speakers, I had it hooked up to my surround sound

$580 ono

More info and pics on request

Regretful sale, help fund my mods!

1-Set of 3 piece jap meshies

Front 17x9+29 with Yokohama c drives 215 45 17 approx 90%

Rears 17x9.5_22 with Khumo platnium 225 45 17 approx 90%

Bit of rash being 2nd hand rims nothing major

Will need spacers to clear front gtst brakes

$1300 ono

2-Genuine Red Rays lock nuts packet of 20

Never used the nuts just opened the packet to use the lock key

Nissan thread 1.25

Still have the reciept from JIS

$180 ONO

3-150mm pink dildo shifter with nissan/toyota thread

$40 ono

Contact via pm

post-63640-0-77874700-1306028729_thumb.jpg

post-63640-0-85688000-1306028978_thumb.jpg

post-63640-0-77307900-1306029085_thumb.jpg

post-63640-0-18177100-1306029133_thumb.jpg

post-63640-0-12788900-1306029173_thumb.jpg

Edited by mark ii

r33 gtst sr1 carbon bonnet bought from autobarn paid $1300 a few years back only used on my car for a few months just been sitting in my shed. has a few light scratches $500 ono

R33 gtr spoiler needs a rub back and paint no end caps $250

R33 4door front lights $250

HKS 25/35 turbo kit (direct bolt up to rb20, 25 and neo 25... uses stock dump, mani etc etc..) i have had braided water in and out made, stock oil in and dump. the turbo is 15,000ks old from new and is in IMMACULATE condition. $1600 FIRM with lines

tein type CS coilovers

suit auto rs4 stagea (series 1 and 2)

32 wat dampner adj, heigh adj

comes with c spaners, some stickers from new, and the little dampner key.

also will include 10k old isc toe and camber arms

$850

sold the pair of z32 air flow metres. one delivered, one on hold pending 3 enquiries...

so all up for sale I have:

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $500

thanks. PM me and we'll arrange what you want, etc.

cheers

Brendan

hey mate interested in the suspention! is it lowered spring or just standard?

tein type CS coilovers

suit auto rs4 stagea (series 1 and 2)

32 wat dampner adj, heigh adj

comes with c spaners, some stickers from new, and the little dampner key.

also will include 10k old isc toe and camber arms

$850

hey mate really interested in the coilovers! would like to see some pics! let us know! cheers

1: R32 "A" Piller mounted boost guage trim to suit 60mm guage $30ono

2: HKS Boost guage and loom (60mm) $50ono

Or take both for $70

Not sure what they are exactly worth. Sorry the pictures arn't very good, they were taken with my phone.

Come come people, I need these items gone asap. The boost guage will not come with the vaccum hose due to me using it for another boost guage.

post-62269-0-40605900-1306052206_thumb.jpg

post-62269-0-71286200-1306052331_thumb.jpg

RB25 850cc top feed injector kit

Been test fitted, never used. Some cosmetic damage (few scratches) from test fitting etc. but doesn't affect the operation at all. Doesn't fit standard manifold hence the reason I'm selling them.

Suit rb25 with aftermarket manifold. WILL NOT FIT STANDARD MANIFOLD.

Comes with

6x 850cc Siemens DEKA injectors

fuel rail

all fittings

all o-rings

all harness plugs

Its all there ready to bolt on.

$600

pm or call 0422 314 938

th_2011-05-23091811.jpg

th_2011-05-23091817.jpg

th_2011-05-23091821.jpg

th_2011-05-23091828.jpg

Edited by SkyHi_33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...