Jump to content
SAU Community

Recommended Posts

hey everyone,

im new to skylines australia but hav had me 33gtst series 1 for a good few years (sori if this looks dodge as im not sure how to use forums) but lately ive had the problem of the car just losing power and stalling for no reason, no throttle response during its dummy spit, sometimes if im lucky i can get the power back but not always!!!!

i have replaced the fuel filter recently but hav replaced 6 months ago the coilpacks, nismo intank fuel pump, spark plugs. hav checked for vacuum leaks when i did a forward facing plenum so all hoses were replaced, plus if it was a leak itd run like crap at idle, hav also put through injector cleaner and hav tried different 98 octane brands incase of dirty fuel! stil hav no idea, (thinking air flow meter now) but if anyone can help or has had this problem can u please help????

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/
Share on other sites

It sounds like an ignition cut, not sure a faulty afm would stop the motor but check it anyway, so so what DVS32R said. Also if you have a turbo timer check it. Does it still have fuel to the cylinders when this happens? Could be ECU and injectors?

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5687019
Share on other sites

hey everyone,

im new to skylines australia but hav had me 33gtst series 1 for a good few years (sori if this looks dodge as im not sure how to use forums) but lately ive had the problem of the car just losing power and stalling for no reason, no throttle response during its dummy spit, sometimes if im lucky i can get the power back but not always!!!!

i have replaced the fuel filter recently but hav replaced 6 months ago the coilpacks, nismo intank fuel pump, spark plugs. hav checked for vacuum leaks when i did a forward facing plenum so all hoses were replaced, plus if it was a leak itd run like crap at idle, hav also put through injector cleaner and hav tried different 98 octane brands incase of dirty fuel! stil hav no idea, (thinking air flow meter now) but if anyone can help or has had this problem can u please help????

i had this happen to my r33,was afm changed to a new one and everything was fine.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689165
Share on other sites

When it happens. How do u get it driving again?

Im thinking afm or ignitor. Both can be affected when they heat up

My R33 S1 runs a 0-100 in 9 seconds when warm... total different car when I first start it up let the oil circulate and put my foot down. I siliconed up the coilpacks, spark plugs are ok but when its warm it runs like crap. The pod is sucking air in from the engine bay and perhaps this could be fixed with an AFM swap? I know the RB30's had big problems with the AFM's. Maybe it will be another thing to check once I have done the wasted spark setup/new plugs.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689851
Share on other sites

mine used to this as well, was very random and i never figured out what it was but it stopped doin it...

I think it has something to do with the solder in the AFM, pretty sure there is a tutorial somehere about how to fix it as well..

EDIT>>>something like this one..

http://www.skylinesaustralia.com/forums/topic/113284-fixing-your-rb26-afms/

Edited by Arthur T3
Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5689895
Share on other sites

I had a similar issue with mine, it would run like poo sometimes and other times it would run awesome, if you stopped at a set of lights it would sometimes just turn itself off, replaced the AFM and no problems after that. Then it came back again, but it was a bit different because it usually happened when driving at night time we could notice the lights dimming, turned out to be one of the amps powering a sub, removed it all and ran a 12" on a smaller amp and it was fine.

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5690186
Share on other sites

  • 1 month later...

sori the computer crashed couple days after postin this, um i usually get it started again by frantically tryin to crank it again and hopin for the best, actually just heard bout the ignitor today but where abouts is it on the car and how would i test it if possible???????

Link to comment
https://www.sau.com.au/forums/topic/355088-no-power/#findComment-5745691
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...