Jump to content
SAU Community

Recommended Posts

tomei valve springs with retainers type b

brand new in unopened bags in box

to suit rb26dett

$550 posted in oz

located adelaide hills

call or msg luke 0438 111 153

  • 3 weeks later...

Description

The TOMEI Valve Springs Set Type-B RB26DETT is required to transfer the exact movement of the camshaft to the valves at high engine speeds on high performance engines. Tomei`s extremely advanced manufacturing process of these springs increases reliability at high RPM`s and will reduce surging, jumping, bouncing, sagging and fatigue.

Product Specs

Brand : TOMEI

Product: Valve Springs Set Type-B RB26DETT

Part Num: 173002

FEATURES:

High quality designed springs is required to transfer the exact movement of the camshaft to the valves at high engine speeds on high performance engines. The TOMEI products are always engineered with precision in mind to suit the user’s needs. So with this in mind careful choices in material selection is made with surface coating and other technologies. Then the pre-production products are put through an extensive testing program for checking durability, quality and performance. We spend time and money to help you save your valuable time and money.

- Reliability in high RPM, and improvement in an initial response.

- High durability against metal fatigue.

- High durability against the shocks from jump and bounce.

- High durability against surging.

- High sag resistance.

- Multi Coil Unequal Pitch Springs:

By combining several steps of spring rates into the one spring and vibration frequency becomes amazingly high. This greatly minimizes resonance and the chances of surging.

- Advanced Oil Tempered Chromium-silicone Alloy Steel Core:

Oil tempered chromium-silicone alloy steel wire is used which is considered to be the best material for springs for performance applications and evolved it even further. Combined with a new optimized design, not only did we make it tougher, we also succeeded in suppressing valve jumps or bounce even when raising the engines speeds RPM limit.

- Nitriding:

The surface treatment method for making nitrogen permeates the spring and gives it large surface compression repulsion. This method was chosen to raise the fatigue limit to suit the demands or running high lift camshafts. The dangers of spring failure is greatly reduced with the 1.5 times increase in the springs fatigue limit with the combined use of Oil tempered chromium-silicone alloy steel wire and Nitriding. This is how our valve springs are suitable for use on extreme engine speed conditions of super-high revs exceeding 10,000 RPM which had not been previously possible with high lift camshafts.

- Shot Peening:

A process that strikes many small steel balls onto the surface of the spring at high speeds is made to enhance the surface of the spring to raise its fatigue limit. Although it has been carried out earlier during the manufacturing process.

- Warm Setting:

The process that is adding higher loads beyond the actual limits to the highly heated spring. This will modify its shape and keep it permanently fixed. We succeeded in securing the highest performance over a long period of time while preventing sagging.

The Set Includes:

- 24x Valve Springs

- 24x Special Retainers

SPECIFICATIONS:

- Type: B

- Diameter(mm): ø4.2

- Set Lenght(mm): 40.2

- Lift Lenght(mm): 29.0

- Supported Lift(mm): 11.50

- Set Load (kgf): 24.0±7%

- Lift Load (kgf): 97.8±7%

- Rev Limit (Ref.): 9500

- Material: SWOSC-VX

- Process: Nitride

- Color ID: Yellow

COMPATIBILITY NOTES:

- These springs are most suggested for Procam camshaft.

Compatibility Info

Nissan Skyline GT-R BNR32 (Zenki - 8/89-8/91) Eng: RB26DETT

Nissan Skyline GT-R BNR32 (Chuki - 8/91-2/93) Eng: RB26DETT

Nissan Skyline GT-R BNR32 (Kouki - 2/93-12/94) Eng: RB26DETT

Nissan Skyline GT-R BCNR33 (Zenki - 1/95-1/96) Eng: RB26DETT

Nissan Skyline GT-R BCNR33 (Chuki - 1/96-2/97) Eng: RB26DETT

Nissan Skyline GT-R BCNR33 (Kouki - 2/97-5/98) Eng: RB26DETT

Nissan Skyline GT-R BNR34 (Zenki - 1/99-8/00) Eng: RB26DETT

Nissan Skyline GT-R BNR34 (Chuki - 8/00-10/00) Eng: RB26DETT

Nissan Skyline GT-R BNR34 (Kouki - 10/00-8/02) Eng: RB26DETT

Nissan Stagea 260RS WGNC34 (Chuki - 11/97-7/98) Eng: RB26DETT

Nissan Stagea 260RS WGNC34 (Kouki - 8/98-9/01) Eng: RB26DETT

Here is sum info on them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...