Jump to content
SAU Community

Recommended Posts

Hello guys

I havent been in a skyline in over 4 years now and have forgotten what its like.

Anyone have an r34 turbo, and can they recommend the car or any known issues that the model has?

Im looking into getting back into one as my daily driver

cheers

SAM

Link to comment
https://www.sau.com.au/forums/topic/355471-wanting-to-get-back-into-a-skyline/
Share on other sites

http://www.skylinesaustralia.com/forums/topic/35129-im-buying-a-skyline-what-should-i-look-for/

My R34 had rust on the boot just above the brake light. Apparently it's a very common problem.

Another one is the coilpacks.

+1 for coilpacks. Mine shat themselves just before the 100Km service - so be prepared for a big hit if the car you are looking at is coming up for its 100K (most these days are hard to come by with that little KM's anyway!)

I went from a 32 to an S15 then to my R34 - best decision i made coming back to the solid strong platform that is the 34 from the '15.

My rear cradle bushings (think thats what they are) went to gravy a while ago and i was getting some weird knocking noises from the back. If the bushes havent been replaced rather recently that may need doing.

Are you looking at manual or auto?

Another thing, if you smash up a 34 the parts are expensive and sometimes hard to get compared to 32's and 33's. I have been sent alot of 33 stuff when i specifically asked for 34 stuff, there is alot of differences between the 2. Other than that, I love my GT-T and it always turns heads. I've always been a fan of 2 door coupe's as its all about the power to weight ;)

I've always been a fan of 2 door coupe's as its all about the power to weight ;)

FWIW, the 4 door R34 is a grand total of 20kg heavier.. IMO thats a small price to pay for two extra doors and (Possibly?) less attention from the boys in blue

Not sure about the 34 coil packs, but when mine started sparking out majorly in my 33, i took them out and put a nice even layer of high heat silicone on all sides of them, havent been a problem since :thumbsup:

I test drove 2 gtt's today, both a black and grey one

fairly stock with only a few minor mods, which is what im after not a car thats a blue oval chaser .....

Anyone know the standard ride height of these cars?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...