Jump to content
SAU Community

Recommended Posts

I woke up this morning thinking that I've never seen a car race where Power to Weight ratio is a class.

There's power band, engine size, NA, Turbo, Rear wheel, Front wheel classes etc... but I never seen a race where cars are put into classes where Power to Weight is the same or similar. It would open up the track to a much greater variety of cars.

Does it exist? If not, is there a reason?

I have no idea why I woke up with this in my head.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/
Share on other sites

Power to weight has very little to do with circuit work.

Think Bathurst.

2 Cars both have the same power to weight, 1 has 200hp 1 has 600hp, which do you think will get around to mountain faster?

Curious...what race class has limits on where in the RPM range you can make power? (power band)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691469
Share on other sites

OK in that particular track, I would think Torque would come into play, fair call. (Forget that Power Band example.)

But say the track was flat? I would think it would be a close race wouldnt it? Actually when I think about it, I guess it would be a dis-advantage for the 200hp car on the straight. But say use the track at Wakefield. When I last went, the Hondas were eating up the bigger powered cars. I guess it depends on the track aye.

I guess why I was thinking of this was I was watching a Mini-Cup challenge on the weekend that I taped. All cars, identical, only thing that separates the winners and losers are the skill of the driver. But it got boring after a bit watching the same cars drive passed over and over. Would be nice to see a race where different types of cars compete together in a fair way.

I know the GT races are kinda like these but they're all Super Cars. Would like to see something more like the World Time Attack Challenege they had here last year.

Edited by Bourbon Boy
Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691571
Share on other sites

What you are thinking of is IPRA (improved production) turbo cars need to run inlet air restrictors, there are minimum weights for different cars etc.

The only real bullets in a straight line are the 6L V8 Commodores, but then they are massivly under tyred so are slow through the corners and have to get on the brakes earlier etc

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691579
Share on other sites

Production sports cars used to run power/weight classes, ie you could choose whatever power and weight you wanted but you would be competing for points against other cars with the same power/weight.

The issue of course is weight is easy to measure and power is not. they used to take a dyno to some rounds and check some cars but it was just too hard to stay on top of. And too easy to fake lower power for a dyno run (eg boost controller or 2 maps on computer).

Tyres are really the best limiting factor IMHO. Keep everyone on the same, cheap, average tyres and lots of other things even out....

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692225
Share on other sites

control tyres are good - but also racing in a one make class is good cause then while some people have big budgets, others dont and is quite competitive.

Duncan you raced in the Daewoo series hey? so pretty much control everything! comes down to skill!

If I were to race in Prod Sports (which my car is built for) Im up against other 2F cars such as lotus's, rx7's, porka's etc which will suck balls.while in the mx5 class, its good as everyone has a different budget and is fun!

but I still come last. haha

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692258
Share on other sites

lol you beat a lotus chris, i remember it well :D

building a car to a class is a good idea (I did it :P) but it is not simple, easy or rewarding. It is limiting and frustrating. My GTR must be about the slowest one in the country!

But from when I first decided to build my own car, I knew I could not outspend the competition, so I went looking for tight rules where budget did not automatically determine who wins.

One make racing was excellent, but because it is close it is full of cheats. The Daewoo series was controlled one make so we couldn't even have the cars to fiddle with them - even so there was 10% power difference between the slowest and fastest of the 20 cars. 10% is a mile. The one time I got the quickest car (wakefield 500), Tom, Mark and I were leading by literally 1 lap when the power failed :(

So basically....there is no such thing as a level field, and no category where you don't need a reasonable budget to win.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692442
Share on other sites

easy...supersprinting :D where are you based?

NICE! Thanks man. I never knew about this... I googled this: http://www.supersprints.com.au/

Is this what you're talking about?

What do you win? Is it just for glory?

Based in Sydney.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5694811
Share on other sites

supersprints are good fun and good entry level.

to give you a run down...

A skyline is to go into class SVD.

Its against the clock - but you are in a class.

you dont race for position on track as its not a race,well, more a race against clock and quickest lap wins.

in SVD class, you'll be up against GTR's, EVO's, highly modified commodores and falcons etc - most will be street registered. in fact I think they have to be street registered to be in SVD

My MX5 is 2B which is 1600-200cc and street rego'd with some modifications

There is the CAMS state supersprint series, and there is also the interclub one. I have done a a couple rounds of the CAMS one but 2009 I did the interclub one with southern sporting car club. 2011 I'll hopefulyl do 4 out of the 6 rounds.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695102
Share on other sites

I was just reading this: http://www.supersprints.com.au/rules-and-regulations/2011/2011%20Vehicle%20Regs.pdf

There is no SVD? Just an SV and I dont think I'd be in that.

I'd probably be in Type 2 class with my 350GT with only an exhaust, braided brake lines & slotted roters as mods.

There is no entry fee information on the website but I assume that it will be in something like a normal club day out like $200-$300 depending on the track??

Whats minimum spend on entry\rego fees in a SuperSprint Championship series? (Excluding car mods\repairs that is...)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695153
Share on other sites

nah your car is SVD. Not type 2.

there are different SV type classes but skylines fall under SVD unless you have an r32 or r35 aussie delivered.

the rules are weird.

entry is anywhere from 180 - 220 and you'll need to hire a timer beacon for 10-20 bucks

no rego fee's for them.

if you want more a relaxed series, the southern sporting car club has 4 at wakie and 2 at EC and isnt as full on as the CAMS state round.

google sscc

cheers!

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695195
Share on other sites

yep!!

some SVD racers do 1.40's at EC and 1.04's at wakie...

however, go there for the fun and try and beat your PB each time!!

if you are out there for fun (most people are!) who cares what lap times, you are out there enjoying your toy! just make realistic lap time goals and aim for them each time!

if you then get serious and bug has bitten, sell and then buy something that maybe comptetive in another class (like me haha)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695490
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...