Jump to content
SAU Community

Recommended Posts

Hey guys,

Lately when i cold start my R34GT I am not able to put it into 1st gear or reverse for a good 6-8 minutes.

Over all my gearbox seems to be a little bit notchy but some of my mates with skylines say they dont notice anything out of the ordinary, so I guess its just me being paranoid.

I have tried pumping the clutch continuously but it makes little difference, is it possible my transmission needs a good flush and new oil?

Thanks for any opinions! rolleyes.gif

Link to comment
https://www.sau.com.au/forums/topic/356379-r34-gt-very-hard-to-put-into-gear/
Share on other sites

how do you mean 'not able to'? and this is pretty extreme in variation to your mates commenting that it is behaving in a way that is 'nothing out of the ordinary'.... also auto or manual? i cant imagine it being an auto with these symptoms but then again i wouldnt be caught with a skyline auto so wouldnt know...

Anyway, sounds like it could be one of 2 things in the simple side of things.

1- yes you do need to change the oil in the gearbox. I do every 20-40,000km and with the best stuff available. Iv also found that skylines love fresh good grearbox oil and work alot better with this.

2- your synchros are f*kd. Iv noticed that the RB25 gearbox can easily get bad synchros due to their age and the abuse they may have experienced in their life (use and mainentence wise.) Also i know alot of skyline owners who think this is normal RB25 box behaviour when in fact their synchos are not in the best of nick. But alot or Rb's have this issue and so many think it is normal behaviour (it isnt...)

its weird you cant put itto gear though as although when cold the oil is thicker and all that. if you not moving the gearset will just stop eventually once the clutch is depressed so you should still be able to put it in, and reverse is not synchronised im pretty sure so depending on where the mainshaft stops it might not go in...

plus if you have done synchros i would doubt 1st... from what i have seen mainly 2nd and 3rd gear synchros go due to ppl shifting real quick putting more stress on the synchros...

does it have a short shifter or anything.. i had one for about a week and box got notchy... took it out, put standard one back in and is perfect again...

+1 on oil i have also noticed that 25 boxes love new oil.. wat do you use jjman?

I believe mine is the same. 2nd gear synchro isn't great. 3rd has a notch. Both get better when warm. 1st is the worst though. I can't shift form 2nd down to 1st. I woul dhave to really push hard, and then probably grind it to get it in. So I just don't ...

I believe mine is the same. 2nd gear synchro isn't great. 3rd has a notch. Both get better when warm. 1st is the worst though. I can't shift form 2nd down to 1st. I woul dhave to really push hard, and then probably grind it to get it in. So I just don't ...

i should have added that.... when 1st gear synchro is worn it would be difficult or impossible to downshift into first without grinding..

Edited by PaulosECR33

edit i doubt it would only be first gear

new oil is the first thing i would do.. see how that goes. i uae that redline shockproof stuff its great but its pretty pricey.

be careful not to mix synthetic and mineral.. very bad things happen when u do that....

how do you mean 'not able to'? and this is pretty extreme in variation to your mates commenting that it is behaving in a way that is 'nothing out of the ordinary'.... also auto or manual? i cant imagine it being an auto with these symptoms but then again i wouldnt be caught with a skyline auto so wouldnt know...

Anyway, sounds like it could be one of 2 things in the simple side of things.

1- yes you do need to change the oil in the gearbox. I do every 20-40,000km and with the best stuff available. Iv also found that skylines love fresh good grearbox oil and work alot better with this.

2- your synchros are f*kd. Iv noticed that the RB25 gearbox can easily get bad synchros due to their age and the abuse they may have experienced in their life (use and mainentence wise.) Also i know alot of skyline owners who think this is normal RB25 box behaviour when in fact their synchos are not in the best of nick. But alot or Rb's have this issue and so many think it is normal behaviour (it isnt...)

Yes it is a manual, and when I say 'not able to'... i mean I literally dare to pull no harder until it warms up..

its weird you cant put itto gear though as although when cold the oil is thicker and all that. if you not moving the gearset will just stop eventually once the clutch is depressed so you should still be able to put it in, and reverse is not synchronised im pretty sure so depending on where the mainshaft stops it might not go in...

plus if you have done synchros i would doubt 1st... from what i have seen mainly 2nd and 3rd gear synchros go due to ppl shifting real quick putting more stress on the synchros...

does it have a short shifter or anything.. i had one for about a week and box got notchy... took it out, put standard one back in and is perfect again...

+1 on oil i have also noticed that 25 boxes love new oil.. wat do you use jjman?

Nope, no short shift.

I dont believe it is the synchro's as first gear does tend to go in a lot easier and sooner then reverse, and afaik (as you said) the reverse gear isnt synchro'd so it must be something else.

Also i should mention i usually can shift down to 1st gear quite easily without grinding, although i do have to be basically stopped or going very slowly ( i know this is somewhat normal ... I say this because my friend appears to be able to shift down to 1st when he is going alot quicker then if it was in my own car.)

Can you get it into 1st with the car turned off and clutch in?

I will check first thing in the morning :), pointless checking now as my car is warm.

yeah im using redline shockproof.

Bottom line is that the RB25 are good but older boxes now so you really need to look after them. So why use anything less than the best?. My R33 with 225kwatw has a box that feels like brand new and i plan to keep it that way. Fully synthetic and changed every10-20,000 kms and i absolutely baby it when cold and then i still only do i hard shift if im murdering someone ;) Otherwise i give it a nice gentle change every time so it goes in with no resistance and doesnt stress the synchros.

I used to have a Suzuki Swift GTi and the synchros went on that big time n i just ended up hating driving it. rrrrrrmmm, chkkkk, clunk, rrrrmmmm= NOT FUN OR COOL. Good thing i rolled it, would have been impossible to sell like that.... :P

Sorry to say Josh but that kind of behaviour from the box is not normal at all and sounds like the synchros are getting pretty f*kd. Change the oil to a really good fully synth (do you even know the lst time it was changed??).

otherwise perhaps things like a selector for or some shit might be the issue, but i doubt it based on the whole 'when it is cold' thing- which is textbook synchros...

Edited by jjman

yeh shockproof is the bomb.. i hate notchy and heavy shifting and that stuff is magic to a gearbox.. well worth the price..

i worked on a truck today that was really hard to shift into 1st and second and slight grinding.. (a synchronised box).... actually the boss made put a new exchange box as its under contract warranty...

any way when that failed to fix it and we had an argument as i thohught the clutch was dragging and gbox was fine he let me diagnose it..

first off i checked the master and slave cylingers for bypassing fluid... all good, holds pressure, returns good.. etc

then went on to check the clutch.. found that it was indeed clutch drag from besicly a defect in the clutch disc,

anyway im not saying that is your problem but clutch dragging could cause your issues and it will take longer disengage drive and mesh the gear so maybe look into that, and if its all good at least you can be confident it is a gearbox issue

first of all put some good oil in like jjman said. new oil works wonders on 25 boxes

Adjust the clutch pedal pushrod up the top of the clutch pedal. U need to adjust it towards the master cylinder so that it disengages the clutch more.

A quick how to do it

I think its a 12mm lock nut, loosen this then with ur fingers or long nose pliers turn the pushrod clockwise so it moves closer to the master cylinder. Keeping in mind if u over adjust it or u dont have any freeplay in the clutch pedal the clutch might slip. So u need to find the best spot for max travel(disengagement of clutch) with some freeplay

half inch rachet for filler... think its 17 or 19mm socket for drain plug (dont quote me though) and a lil oil pump or a hose with funnel... you can also fill it through the shifter hole if you can be bothered taking the shifter out...

make sure plugs are tight but not too tights as its alloy case.. let us know how it goes

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...