Jump to content
SAU Community

R32 Gts-T Correct Liveable Unmodified Dimensions

Yts
 Share

Recommended Posts

Yts Rising Star

Yts

Posted
Posted

i have looked through the wheel offset guide and havent found much info on the r32 gts-t in terms of 18 inch wheels, does anyone run 18s without modifications if so what is the offsets and any pics?

i have 17s on at the moment i like them just thinking a set of 18 would fill out the look a bit more but i dont want to modify the guards, i have rang a few places and asked and been given different opinions i dont want to buy a set that wont fit.

any help is appreciated

R32_GODZILLA Proficient

R32_GODZILLA

Posted
Posted

That 32 with the 33 gt-r wheels was my old car. You can run those dimensions comfortably with correct tyre sizes. I was running 235's on the rear and the guards WILL need to be rolled. You could possibly get away with running 225's though.

The new owner upgraded to 18x9 + 30 XD9's (as shown in pic) and the 18's sit much better on the car. There's no scrubbing to be had, but like I said the guards are also rolled.

post-2240-0-56505400-1300165817_thumb.jpg

Yts Rising Star

Yts

Posted
  • Author
Posted

That 32 with the 33 gt-r wheels was my old car. You can run those dimensions comfortably with correct tyre sizes. I was running 235's on the rear and the guards WILL need to be rolled. You could possibly get away with running 225's though.

The new owner upgraded to 18x9 + 30 XD9's (as shown in pic) and the 18's sit much better on the car. There's no scrubbing to be had, but like I said the guards are also rolled.

post-2240-0-56505400-1300165817_thumb.jpg

cheers how much to get the guards rolled, what size tyre were you running on the front, currently i have 215/45/r17 on front and 235/45/r17 on rear, rear bar is the only thing really keeping it legal otherwise they would be sticking out a bit.

R32_GODZILLA Proficient

R32_GODZILLA

Posted
Posted

I think I payed 50-60 a corner IIRC - Been a few years now. I was running 235's at the front with the pic that R TUNE posted and it was horrible.

Size 225's worked fine, 215s would be perfect and you probably wont even need to roll the fronts. With 235s on the rear you will need the roll done if you want to run a nice ride height with the 9" +30 rim, could possible get away with 225's but I didn't test this before I rolled mine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
    • MBS206
      remote oil cooler hose size, 8,10 or an12?

      By MBS206 · Posted

      -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
    • Dose Pipe Sutututu
      remote oil cooler hose size, 8,10 or an12?

      By Dose Pipe Sutututu · Posted

      More so GReddy oil relocation kits, sandwich plates, etc. all use 10AN fittings. And same, I've only used 10AN and my car sees track work (circuit, doing laps, not 10 sec squirt business).
×
×
  • Create New...