Jump to content
SAU Community

Rb25 Head, Turbos, Injectors And More!

MBS206
 Share

Recommended Posts

MBS206 Grand Master

MBS206

Posted
Posted

Hey guys,

Well my RB25/30 days have come to an end, and as such, I have multiple items that need to be sold.

1:

RB25 Head.

This head has minor porting (Throat Job) and was rebuilt around 1500KM ago.

Include the cam covers that have been powder coated in Candy Red.

Oil Gallery has been welded for fitment to an RB30.

Asking Price: $750 ONO.

2.

ATR43G3 Turbo

Was only put on a car, and started up by previous owner. I've never run it.

Comes with stock exhaust mani and stainless dump pipe. Has the 14PSi actuator on it.

Asking Price: $850 ONO.

3.

SARD 880CC Side Feed Injectors.

These have the same amount of K's on them as the head (1500KM) and come with a freshly powder coated standard fuel rail (Candy Red) with standard FPR.

Asking Price: $750 ONO

4.

R33 GTS-t 5 Speed Manual Gearbox.

Car has 172 000KM on the clock (But most likely more), gears never whined or anything. Drives like a typical R33 GTS-t box. If I can find the short shifter, I'll throw this in too.

Asking Price: $1500 ONO

5. Generic Forward Facing Plenum.

I never ran this, bought it second hand, with throttle body and idle valve.

Asking $500 ONO, is a chrome polished finish.

6.

Plazmaman 100mm Core FMIC.

I've had this on my car since I bought it, and it's been great.

I don't know the height and width of it, but it fills the whole behind of my front grill.

Will throw all of the intercooler piping in I have for it too.

$400 ONO.

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

8. Yellow Jacket Coils

Done approx 1500KM, work great, have external R33 Ignitor with them too.

$150 ONO

There will be more to come as I dig it out of the garage, and it gets ripped off the car as it's no longer required.

I'm contactable via PM on here, or via phone by calling 0406 962 347.

Most things are in Wollongong, except for the Gearbox and the Head. (There are a couple of bits and pieces still at Craved Coatings, yes, free plug, he does AMAZING WORK!)

I don't want to be arranging shipping, so would prefer pick up or drop off.

Link to comment
https://www.sau.com.au/forums/topic/356569-rb25-head-turbos-injectors-and-more/
Share on other sites
Cassbo Grand Master

Cassbo

Posted
Posted

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

I'm the one with Matt's clutch/pressure plate/flywheel. As he says, works fine on my car (got be from Sydney to Winton, around Winton a couple of times and back to Sydney again without any dramas). I'd consider buying it if I hadn't already sunk around $1,200 into an OS Giken clutch :P

My clutch should arrive in the country next week, so it will probably be around 3-4 weeks before Matt's one is available. I might be able to get it done quicker if pressed ;)

MBS206 Grand Master

MBS206

Posted
  • Author
Posted

Jimmy, if performance wise say they do, I'd go with what they say.

Nik. You're welcome to make an offer, other wise, please STFU if you're just trolling.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32 update from 1990's spec.

      By djr81 · Posted

      So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...