Jump to content
SAU Community

Anyone Here Kart

Paragon

By Paragon,
in Australian Capital Territory

 Share

Recommended Posts

Paragon Proficient

Paragon

Posted
Posted

Just getting into Rotax racing, wondering if any of you guys are already out there with www.canberrakarts.com.au

Its great for competitive people as its a sport where you can actually race other people rather than doing trackdays where you don't race anyone other than yourself.

I found after doing track days, the costs were adding up to.

A new set of slicks for the kart is $250 compared to $500 a tyre for RE55s.

Brake pads are less than $50 compared to $600 for a set for the car and everything tends to last longer too.

And the main thing in karting is everyone all has the same gear, so its a real chance to test your driving skills against others.

Hope to see some of you out there!

Link to comment
https://www.sau.com.au/forums/topic/356959-anyone-here-kart/
Share on other sites
Trozzle Grand Master

Trozzle

Posted
Posted

I'd considered it, but it's a bit too much of a dedication for me. There as a dude here trying to get rid of all his karting gear for around the $6k mark I believe (inc trailer) which looked pretty amazing since it should get you straight into your first race...but the time would just be too much on the side :(

a20089 Veteran

a20089

Posted
Posted

I found after doing track days, the costs were adding up to.

A new set of slicks for the kart is $250 compared to $500 a tyre for RE55s.

Brake pads are less than $50 compared to $600 for a set for the car and everything tends to last longer too.

Get the Federal tyres for a good cheap alternative to RE55's, and my full race brake pads I imported from America at half the cost locally. You can make a lot of savings if you try.

Saying that any smaller vehicle is far cheaper to run and less damaging to components. I run a stock motorbike that apart from fuel has never cost me anything to repair or replace doing multiple track days.

Only advange to the car and bike over a cart is I can drive them to the race track and drive them back, and they have a much broader market when I want to sell them.

zebra Grand Master

zebra

Posted
Posted

Only thing with running the federal RSR's is that you are instantly 2 secs a lap slower over RE55's even more so if you run AO50's or DZ03's.

A mate of mine was QLD u16's cart champ a few years back....carting is all about budget/the best equipment, he went from mid pack with a cheaper cart, then bought the best cart avaliable and blitzed the field everyrace without trying.

So its cheaper if you wanna go have fun, but if you want to win it gets just as expensive as running a car at supersprint days.

Which is why I never bought a cart when I had the chance.

Not saying dont do it, because its awesome fun.

a20089 Veteran

a20089

Posted
Posted

Only thing with running the federal RSR's is that you are instantly 2 secs a lap slower over RE55's even more so if you run AO50's or DZ03's.

Never.... :) That would put me in the same time bracket as Dennis in Duncan's full race car. With Dunacan only a second and a half faster again. http://www.natsoft.com.au/cgi-bin/results.cgi?05/03/2011.WAKE.S6.Y

With Slicks I could probably pick up 2 seconds, but you seem to be saying upgrading the RSR's to real semi slicks will gain about 3 seconds. That's like saying my mostly stock GTR is as fast as the best SAUNSW car around Wakefield.

I'd love to say you are correct, but I'm not that good.

Galois Veteran

Galois

Posted
Posted

It's a fantastic sport and you'll have a blast mate.

Karting forums often mention that if you're going a bit slow it's a problem with the spacer. Spacer refers to the item between the steering wheel and the seat, ie: the driver. It is true that if you buy a brand new chassis and engine you'll have an advantage, but it is mostly driver skill. I'm sure lewis hamilton could get in a kart 10 years older than the field and blitz them, at sub world class anyways. Setup also makes a big difference, by changing to the correct jet you can save a full second a lap.

But instead of spending the best part of 10k on new parts, you can buy a kart plus engine for 2500 and go. Mine is for sale for 5k ono now, and i really regret leaving the sport. Unfortunately I can't afford it atm, I couldn't afford to keep the r34 either.

One more point, if you exchange some paint on a track day it's a big pain. If you do it in a kart it's just normal racing. There are no fancy paint jobs to scratch or delicate panels to bend. I've seen some fairly high speed crashes (maybe 80km/h backwards into the tyre wall) where the person dragged his kart back onto the track and started up again, kart un-damaged.

I look forward to the day I get back into it, but at the moment I'm just trying to get enough money together to last this year at uni, so I can get out and earn some money!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • BuiltNotBought
      Airbox for +T

      By BuiltNotBought · Posted

      There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...