Jump to content
SAU Community

Recommended Posts

are you sure a falcon is wise idea for a tow car?

Out of all the family sedans out there, it would have to be among the best (provided it's rated to 2300kg or whatever the Ford rating at the time was). If you're going to be towing a dozen times a year, then there's no reason it won't handle it OK. They were still built on a fairly decent, solid chassis.

If you're going to be towing every week, or multiple times a week, then I'd suggedt springing for a good 4WD tow vehicle. These are always a nice to have, but not essential, specially if money is tight.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715492
Share on other sites

Out of all the family sedans out there, it would have to be among the best (provided it's rated to 2300kg or whatever the Ford rating at the time was). If you're going to be towing a dozen times a year, then there's no reason it won't handle it OK. They were still built on a fairly decent, solid chassis.

If you're going to be towing every week, or multiple times a week, then I'd suggedt springing for a good 4WD tow vehicle. These are always a nice to have, but not essential, specially if money is tight.

i just worry about the brakes. even my patrol suffers from fade when towing the gtr, and ive up graded the brakes on it as its a work ute. would hate to see anythin go wrong cos of a braking issue, thats all.

cheers adam

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715538
Share on other sites

Are the brakes on your trailer up to scratch and properly set up? If they are, then this shouldn't be putting any significant extra load on your car's brakes under normal driving. Towing a GTR means you're likely over 2 tonnes ATM, meaning you need to have brakes on all trailer wheels. Do you have this?

Not sure how good / bad the brakes on the Falcon are - I remember I was mightily impressed by the brakes on my XR6 ute many years ago, even when towing an unbraked car trailer with a S4 RX7 on the back (the trailer had electric brakes and at that stage I didn't have my car set up for it. Didn't know about it till I lobbed up in the morning to pick up the rally car / trailer to tow to a rally I was servicing at - yes stupid I know).

Can't say I've ever had brake fade while towing - even with the PAthfinder's squishy confidence inspiring brake package.

HAving said all that, at least you have the right approach to towing. Don't do it unless you're confident that the tow vehicle is up to the task in every way. As I said earlier, if you have to use a family sedan, I'd rate the Falcons above just about anything else.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715707
Share on other sites

Bit of a tangent here, but on the question of what feels faster, a torquey, low revving V8 will often feel slower than a high revving turbo 6 as it makes power everywhere which means no "coming on boost" which can often give the false impression of speed.

My mate has an SII BA XR8 and it's almost neck and neck between it and my R33 GTST (mine is ever so fractionally faster in a straight line) however the R33 feels much faster. I remember the first time I took him for a spin in it his head nearly exploded as he thought it was so damn fast. Fact is, it's not much different to his car, and he flogs his thing everywhere. It's just his thing makes pwer from idle so lacks that kick in the pants feel that pretty much everyone on here is likely addicted to.

So while something like an XR8 may feel a lot slower than something like a turbo skyline, fact is there's probably a lot less between them than you think. And when it comes to corners, it's about 70% driver 30% car so a good steerer in an XR8 will likely spank a nubcake in a skyline.

youll find thats probably due to the 4.11 diff gears in the GTST

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715757
Share on other sites

youll find thats probably due to the 4.11 diff gears in the GTST

True. I know I've said this a lot, but my NA Supra and the Monaro have the same 0-100kph time of 6.7sec. Everyone knows the Monaro is far more powerful and faster, but their gears are ridiculous. Apparently if you're doing 100kph in one and put it in sixth gear it nearly stalls.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715855
Share on other sites

I had an AU Fairmont with the i6 engine and then a AU Fairmont Ghia with the 175kw V8 (dyno'd at 130rwkw). The Fairmont was over 211000km when I bought it, was a great car. Traded it in for the Ghia V8 which had over 120000km and the oil came out after 10000km the same colour it went in. Did about 450-500 to a tank. I had no mechanical or electrical issues with either car.

My dad had similar issues to those on his au.

I was looking at them a while ago. The basic 5.0 L engine isn't much more powerful (13kW) or torquey (32Nm) than the xr6 at the time. And, worst of all, made at about the same rpm. It certainly felt pretty slow and heavy, despite extractors and twin 3" exhausts (well, felt and WAS slow and heavy). Getting out of the r34 and straight into it didn't help though.

(Source: http://www.trueblueford.com/AU_XR_Specifications.html )

When I was looking at them the problem that kept coming up was a whining diff, which needed some pin replaced, can't remember how much it was. Certainly wasn't cheap. I also found the pedals sticky and numb, not smooth like in almost every japanese car I've driven.

All that said though, it's a lot of car for the dough and the noise was fantastic!!! Also cheap to fix and your average mechanic is capable of working on it.

Twin 3" is way too big on a N/A 5L.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5715908
Share on other sites

Maybe that was part of it. The earlier au v8's weren't much good though, it was the later au's that had a lot more torque over the xr6 (500Nm). I think the torque came on song earlier too, someone can confirm that though.

With a v8 you don't want to be revving to get the torque, the thing's don't rev and have like a 5k redline.

On towcars, massive topic here

http://www.skylinesaustralia.com/forums/topic/272151-good-tow-cars/

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5716243
Share on other sites

youll find thats probably due to the 4.11 diff gears in the GTST

It's all relative.

You can't compare diff ratios in two totally different cars.

True. I know I've said this a lot, but my NA Supra and the Monaro have the same 0-100kph time of 6.7sec. Everyone knows the Monaro is far more powerful and faster, but their gears are ridiculous. Apparently if you're doing 100kph in one and put it in sixth gear it nearly stalls.

The Holdens, like the Fords, ave a double overdriven gearbox. Top gear is for highway cruising only.

The rest of the ratios, and the diff ratio, are relatively the same as most other cars. And quote 0-100 time is pretty much meaningless. Get them both ont he strip and see what outguns what. I bet in real world the Monaro (I assume a 350ci) would eat the Supra.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5716762
Share on other sites

My dad has an AUII XR8 220kw manual, standard except for K&N filter and bigger exhaust. The thing goes very well, some people think that they steer better than the BA. They also have a (heavier) better IRS setup than the BA. He averages about 10.9l/100km, mixture of freeway and some suburban driving. Depending on what you are paying, you will struggle to get more car for the money.

Link to comment
https://www.sau.com.au/forums/topic/357250-au-xr8/page/2/#findComment-5725044
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...