Jump to content
SAU Community

Recommended Posts

Hi all I am running another group buy for AM Performance Blast pipes. I ran one about 8 months ago with great success and everyone was thrilled with their pipes.

The pipes are high quality stainless steel items in either 3 or 4 inch entry with twin 3 or 4 inch muffled or un muffled pipes so the choice is yours to option them the way you want. I high recommend the twin 4 inch muffled with single 3 inch entry for most cars as they look and sound stunning. All pipes are Tig welded and polished mirror finished.

hangers are not supplied.. its up to you to work out positioning and get them fitted professionally. if your in SA they can be fitted by AM Performance for a very small fee.

I will be doing a small run for now of 5 orders. I will neeed all 5 spots filled before placing an order.

Pricing works like this

$280 for straight thro pipes in either 3 or 4 inch.

$310 for muffled pipes in either 3/4 inch.

$30 for express postage on all pipes (if outside of SA)

rrp is $380 normally. so quite a saving.

all you need to do to place an order is to email me on MY EMAIL with your choice of diameter entry AND exit. make a payment to the acct below and once all spots are filled allowed 7 working days from then and they will all be done.

Simon Michelmore

Commonwealth Bank

bsb: 065-137

acc: 1076 8747

again... make sure you email me with an order. any questions feel free to PM me.

PICS

amperformanceblastpipes.jpg

tndsc04083.jpg

tndsc04079.jpg

fantastic quality people!

i run a set of these on my s14, look great and sound great, very high quality items, you wont be disappointed.

Vu: best to speak to andrew directly and discuss what you want to do and he'll be able to give you a price. let him know your interested in a blast pipe from the group buy and you'll get a special price.

  • 2 weeks later...

keen as!!

how much difference would there be between muffled and non muffled? (4" body 3" inlet)

a fair bit in terms of sound... the unmuffled are best for track only cars.

they visually look the same from the outside.

  • 3 weeks later...

this GB has closed.. those that have placed an order will get theirs hopefully by the end of the week or early next week (it is easter remember and this slows down postage times)

for those who are curious.. AM Performance are now doing titanium blast pipes :D can do a whole Ti exhaust if you wanted to but needs to be made to order (IE you'd need to be in SA)

218007_10150156684091090_716151089_7239774_7725163_n.jpg

206590_1887872109900_1034359196_2099513_3595488_n.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...