Jump to content
SAU Community

Recommended Posts

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Yer kinda, it's only a standard stall ATM (and its really bad putting that much load on it as u can ballon it lol) so it literally wasn't even off the converter forever so it was just a pathetically slow half track followed by it weirdly starting to pull hard from half track. Would of looked messed up from outside, weird sounding skyline that only has one gear lol

Indeed very interesting. Join us!

I did last years drag day, my first and only so far. my car was dead stock other than a cat back exhaust, no mad weight reduction. best I got was a 14.3

Now that I've done the usual cheap bolt on mods I'd be very interested to see the difference.

Launching is key to a good run, especially in a stock car.

I'll see if i can find my time slip :)

post-62717-0-37470900-1368655184_thumb.jpg

This drag day is getting more and more interesting. May have to show my face..

Show, do eeeet :)

Ill be there weather I have my car or not.... I can always post a time slip later on

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

No that was my mate with that car, plates were HYPD UP.. Nice car made 450hp at the rears, motor was capable of a lot more though. He has since traded it. This is mine. Was at powercruise last year and powerplay back in FEB.

33JDM2_zps66dc549a.jpg

I'd give u a lift but Im not going and couldn't take u home, but if u spray hairspray on a pen stain before u wash it the stain will be removed easier so you see that's 2 non helpful things but one helpful therefore I beat zeke :P

Oh nice :). I'm in Petrie.

However, unless you change your mind about the lift home, or unless someone else offers me a lift home, I'll have to pass.

For a gobbie I can probably give you a lift home ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
    • Haha good old Letterkenny! If you're looking for another great english canadian comedy, I strongly recommend Trailer Park Boys. 
×
×
  • Create New...