Jump to content
SAU Community

Recommended Posts

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Yer kinda, it's only a standard stall ATM (and its really bad putting that much load on it as u can ballon it lol) so it literally wasn't even off the converter forever so it was just a pathetically slow half track followed by it weirdly starting to pull hard from half track. Would of looked messed up from outside, weird sounding skyline that only has one gear lol

Indeed very interesting. Join us!

I did last years drag day, my first and only so far. my car was dead stock other than a cat back exhaust, no mad weight reduction. best I got was a 14.3

Now that I've done the usual cheap bolt on mods I'd be very interested to see the difference.

Launching is key to a good run, especially in a stock car.

I'll see if i can find my time slip :)

post-62717-0-37470900-1368655184_thumb.jpg

This drag day is getting more and more interesting. May have to show my face..

Show, do eeeet :)

Ill be there weather I have my car or not.... I can always post a time slip later on

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

No that was my mate with that car, plates were HYPD UP.. Nice car made 450hp at the rears, motor was capable of a lot more though. He has since traded it. This is mine. Was at powercruise last year and powerplay back in FEB.

33JDM2_zps66dc549a.jpg

I'd give u a lift but Im not going and couldn't take u home, but if u spray hairspray on a pen stain before u wash it the stain will be removed easier so you see that's 2 non helpful things but one helpful therefore I beat zeke :P

Oh nice :). I'm in Petrie.

However, unless you change your mind about the lift home, or unless someone else offers me a lift home, I'll have to pass.

For a gobbie I can probably give you a lift home ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds like someone who would have owned an R33 in their past... It's okay, I'm 100% picking up what you're putting down Mark.
    • Just back on what was raised about jacking off the the tow/tie down point on the front of cars. I've used it plenty. I've also watched it on a car where you could see it move the front end of the car. It was like the front end/whole car being tweaked and twisted a bit. I will say, I struggle to find good jacking points on MOST cars. The ones that have good points, I then normally struggle to find a jack tall enough to make the car change height!   One of my go to points for either the jack, or the axel stands though, is either a suspension pickup point, OR a subframe to chassis major bolting point. I actually think its the subframe on my R33 that has a bit of a bend in it, from being jacked in the middle too. However, it could have been one of my many other cars I've had over the years! Or it could also be the from me jacking it up, and the fact the top of the front radiator support isn't there, so it can allow the front of the car to move and bend etc.
    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
×
×
  • Create New...