Jump to content
SAU Community

Recommended Posts

 so they sell Maccas?

I assumed the series 1 didnt have VCT at all.  series 1.5 and 2 have it on the exhaust side, and the 34 NEO has both intake and exhaust....or so I thought.

Worse than maccas!

Is on the intake cam only in all forms of rb25

Worse than maccas!

Is on the intake cam only in all forms of rb25

nothing is worse than maccas.

hold on what? so the CAS is on the exhaust side...makes sense I guess seeing as that is the exhaust side of the engine

Man i gotta stop reading the internets

 

nothing is worse than maccas.   

 

hold on what? so the CAS is on the exhaust side...makes sense I guess seeing as that is the exhaust side of the engine

Man i gotta stop reading the internets

If you believe everything on the internet you're gonna have a bad time.

1 Skid, and general wear, It is bald as all buggery on the inside, heaps of meat on the outer edge, Unless the cops look under it she looks like it is good. New one next payday.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...