Jump to content
SAU Community

Recommended Posts

Nearly 2 months on, but i finally have my speedo sender, arrived today and is installed and WORKING!!

hard to tell how much the power steering coming back has changed things, as i have different wheels, different steering wheel and HICAS removed.

atleast when i get it rego'd i'll be able to drive it around a bit and get some road tuning done.

  • Replies 184
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 months later...

Spent a little time on this in the last 2 months, though not enough :(

Car is rego'd and running on the road!

took the car out for a few drives and was blowing IC hoses - easy fix with welding on some beads to the new alloy piping i made

Car is running better and better everytime i take it out. Fiddled with the tune and did some logging with the datalogit - ended up adding 4 degrees of timing in the off boost area with only 3 cells reporting 15 or 16 knock in the logs - just have a loose connection in the wideband setup that stops it working every now and then. probably something i did when i was hooking the PLX SM-AFR up to the datalogit unit.

Anyway, it feels much faster than my stocker 33 for normal road driving, as any boost really does send me over the speed limit lol - think i can get to about 3psi before im speeding haha

best thing - its so quiet!!! (well except the exhaust) - no rattles, no knocks just a little scrubbing on the stock rear guards over bumps, so a quick roll of the guards should sort that out.

Cheers Dave - chop chop :P

time to finished the interior for me though

Ah well I have already finished that part of mine.

BTW more coating to be done soon on a new strut brace. Friggen C/F bonnet won't shut with teh nismo one :(

that sucks dave :( i'll see if i can find any spare alloy to make a new centre for you.

Some pics of the new manifold im making from my fabrication thread - http://www.skylinesa...ds-fabrication/

post-5157-0-32760400-1319340562_thumb.jpg

post-5157-0-94840000-1319340563_thumb.jpg

post-5157-0-58149100-1319340565_thumb.jpg

post-5157-0-78538100-1319340566_thumb.jpg

  • 10 months later...

Cant believe how long its been already - hoping to get a bunch of stuff fitted for the cruise on the 30th - see how that goes

car needs some tunes, so a mount for the Amp needs to be fabricated asap.

Cant believe how long its been already - hoping to get a bunch of stuff fitted for the cruise on the 30th - see how that goes

car needs some tunes, so a mount for the Amp needs to be fabricated asap.

Wow! Been ages........... i wanted to make that cruise but will depend on how the car is running with the issues.................

SO much positive feedback from your handy work ;)

nothing new, i havent had time to drive it since i got it home, jsut in and out of shed a few times lol

time for fresh fuel, new fuel surge tank, amp mount and some street tyres on another set of 350z rims i bought.

  • 10 months later...

its been pretty crazy after moving into my new shop and expanding the services i provide into the domestic and commercial/industrial market.

but now i've had some time to get working on my own things again.

newly coated bronze 350z rims with some federal 595's for street duties

post-5157-0-11334500-1376200389_thumb.jpg

Then in prep of getting my 26/30 finished one day i figured ill spend on a known commodity of a 6boost manifold - designed for the 26/30 but with a 25/26 flange pattern so i can get it installed on the RB25 and only have limited changes to make when the motor is built and swapped over.

upgraded from the tial 38mm wastegate to the turbosmart 50mm item, the old setup had the gate hanging right down at the chassis rail via some adapters etc, never caused any issues but wasnt as neat as id like

post-5157-0-90386700-1376200511_thumb.jpeg

post-5157-0-59561900-1376200537_thumb.jpeg

got some time to perfect the surge tank design, my original fabricated one was around 4.5L and overkill.

new one is 2L and alot tighter to the car and will weigh less and is easier to replicate if anybody would want one.

post-5157-0-77183300-1376200674_thumb.jpeg

post-5157-0-32361000-1376200698_thumb.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...