Jump to content
SAU Community

M35 Stagea


vi3t
 Share

Recommended Posts

Hi all! Name is Viet, just got an m35 stagea 2weeks ago but its got some minor problems.

My faint engine light keeps appearing even after ressetting the ecu, it comes up with code 0171 which i believe is left bank lean. I notice that my car drinks alot (18l/100km) so im suspecting the o2 sensor which from nissan is $160 with a 2 week wait.

Also notice that on my stock exhaust only the left tip is working, the right is clean.

Does anyone know if the skyline v35 o2 sensor can be used and also if the v35 nav unit will work in my stagea as it was missing from purchased?

Having a hard time of finding basic servicing information as in:

Oil used, how many litres to fill up?

Oil filter part number?

Spark plug number and gapping?

Transmission fluid and capacity?

Diff fluid and capacity?

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Thanks you advance!

If anyone lives in the western surburbs of melbounre and would like meet up please pm me, would love to learn more about these cars!

4wd fluid and capacity how to bleed?

Link to comment
Share on other sites

OK, I'll bite. Can't give all the answers but some of them.

Also notice that on my stock exhaust only the left tip is working, the right is clean.

Don't worry, it opens up when you give it a boot full. the exhaust is variable and contains a pressure flap inside.

Does anyone know if the skyline v35 o2 sensor can be used and also if the v35 nav unit will work in my stagea as it was missing from purchased?

1) don't know 2)the Nav function will never work as its Jap only. Buy a UBD. it would be a lot of work to get the shit in there.

Oil used, how many litres to fill up?

4.8 or something like that - most of us are lazy and just dump a 5 litre bottle in.

Oil filter part number?

I can't be assed going downstairs and looking - just ask for something from a 03 350Z you'll get the right one. its fits a shitload of nissan cars.

Spark plug number and gapping?

Different people have had different experiences. Have a search on the site.

Transmission fluid and capacity?

Nissan Matic J, or Nulon 100% sythn seems to be the other proven performer. about 8.5 litres - remember you have to flush it not just drop the Pan, that'll only get about 4 litres.

Diff fluid and capacity?

Redline shockproof - about 1 L per diff I think. Use good quality cause you don't want to change it for a long time...

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Don't know. should have bought an ARX....:thumbsup: Might be the worlds only Raised Stagea!

4wd fluid and capacity how to bleed?

Nissan Matic D / ????

Hope that helps you to some extent.

I'll let the other guys handle the error message- I have my own thoughts but they are more experienced.

Link to comment
Share on other sites

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Don't know. should have bought an ARX....:thumbsup: Might be the worlds only Raised Stagea!

The ARX springs will get you a little more lift, I didnt swap my shocks over but I've got ARX springs in; with Nismo springs my front lip was 8cm off the ground.. Looked AWESOME but killed me in terms of functionality. Im now somewhere around 15cm off the ground at the front. So if you need some height and can source the springs, do it thumbsup.gif

Link to comment
Share on other sites

I've got a set of factory ARX springs and shocks in storage if you must go higher. But I recommend lowering of the RS/RX for bitumen and finding a ute for fishing.

I know what you mean about the exhaust tips. I didn't realise until now that the Calsonic has a pressure flap - clever. I just thought mine was always blocked .pinch.gif

Agree with everything PN-Mad mentioned. I replaced my transfer case and Attesa fluids and there is lots of good info on how to do it with the search. Both fairly easy but I needed an extra hand with bleeding the Attesa pump.:thumbsup:

Link to comment
Share on other sites

I've got a set of factory ARX springs and shocks in storage if you must go higher. But I recommend lowering of the RS/RX for bitumen and finding a ute for fishing.

I know what you mean about the exhaust tips. I didn't realise until now that the Calsonic has a pressure flap - clever. I just thought mine was always blocked .pinch.gif

Agree with everything PN-Mad mentioned. I replaced my transfer case and Attesa fluids and there is lots of good info on how to do it with the search. Both fairly easy but I needed an extra hand with bleeding the Attesa pump.:thumbsup:

Hey Gazza,

Did you replace your ARX suspension with BC's ?

How is the ride now?

Link to comment
Share on other sites

Hey Gazza,

Did you replace your ARX suspension with BC's ?

How is the ride now?

Replaced the shocks with Bilsteins and the springs with original-height (ARX) King Springs heavy duty. However, I've recently seen a heap of lowered ARX and they do look better - even with the flared guards. I just find the tailgate doesn't open high enough so at the time decided against lowering.

The ride is firmer but still comfortable. It just suffers now from the factory sway bars but Dale will soon sort this out with the Whitelines.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Updating results.  Using ATR45SS-0 model VS UHF57-900. Those two are very different turbos, different wheels sets with different wheel hub profiles but yet with almost identical result. I’m intrigued with both turbos performance. ATR45SS-0 was a 61mm turbo first developed in May 2020, UHF57-900 was a 62mm turbo developed in March 2024 as a powered up alternative of a G30-900. On paper ATR45SS-0 maxed at 563rwkws, while UHF57-900 maxed at 568rwkws. ATR45SS was slightly more responsive with slightly better power band through the mid range.  Road driving ability, ATR45SS-0 had better throttle response, felt more robust under throttle, as it wakes up earlier. I think G series wheel hub design made it to have higher inertia under light throttle. Doing bit more prototype work in the next few weeks, will update result when its back on dyno again. ATR45SS0 Blue, UHF57-900 Red Chequered tuner's Dynapack hub dyno, E85 fuel. Mod list is in video below video_20240604_114214.mp4    
    • Did you run the power cables for the mac valve to the other side of the car near the fusebox? Utilizing the stock boost controller cables? or did you run new ones?
    • Hey I have a potentially stupid HICAS question 🤣 I'm currently doing a full hicas delete, Power steering pump modified to non hicas, all lines removed from the car along with all electronics. My stupid question is - Do I need a lock out bar? is there any reason why I cant just remove everything from the rear end? I already have a lock out bar but thinking to save a few extra grams I could also get rid of the arms and tie rods as well and just run it with nothing in its place? or would it have a negative effect on handling?
    • Hi how are you guys?  I know i have been absent for years but im coming back slowly guys just wondering if anyone know where the ball joint on the NISMO arm front and rear can be replaced with OE parts?  Also  i know this is not the thread looking for springs and blistein shocks for the 260rs. Please advcie     cheers    yudy
    • Hi i do you have for stages 260rs?
×
×
  • Create New...