Jump to content
SAU Community

Recommended Posts

1989 R32 nissan skyline 4 door. GTS-T. with RB25DET ENGINE CONVERTION and RB25DET 5 speed manual gearbox ALL REGENCY APPROVED AND COMPLIED!!!!

-128,000kms

-5 speed manual

-280kmh nismo dash cluster

-GENIUNE R32 GTR FRONT BAR

Re-mapped R32 ECU-RB20 HI-FLO Turbo(so it winds boost very early and aggresively :)-Intercooler-R33 GTST brakes-3inch performance exhaust all the way from turbo back-aftermarket fuel pump-aftermarket swing arms,sway bars- full alarm and immobiliser setup with REMOTE START FROM 1km AWAY!! car starts itself :)-Electronic boost controller-turbo timer-awesome stereo. twin jbl subs,twin amps(been in street machine cause of stereo recorded at 128db with old system. now got new system just hasent been recorded.) holds sound great.-18x10.5 inch roh massive dish wheels worth $3,250 NEW!! (these wheels are what makes this car look as good as it does) seriously-3 new tyres-Momo Racing legal steering wheel.-lightened flywheel-shimmed diff-hi-cass locker bar.( slides like a dream :P )FULLY ADJUSTABLE TEIN HA COILOVERS!! LIST IS TOO BIG :)

this is the 1989 model so the exhaust emissions are alot less strict. legally aloud to be 119db- r32 1989+ =93db

THIS CAR HAS BEEN IN AUTOSALON TWICE AND OTHER VARIOUS CAR CRUISES. NEED IT GONE ASAP CAUSE I NEED A 4WD AND MORE OF A WORK CAR AS IM A CONSTRUCTION WORKER. SERIOUS BUYERS ONLY. JEREMY SCHENSCHER....CALL MY MOBILE ON 0427142906 OR 0448113696 IF 1ST NUMBER DOESNT WORK THOUSANDS SPENT!!!!!!!!!!!!

post-73973-0-97620500-1300454326_thumb.jpg

post-73973-0-57509900-1300454364_thumb.jpg

post-73973-0-29007000-1300454619_thumb.jpg

Edited by Schenscher
Link to comment
https://www.sau.com.au/forums/topic/357908-fsr32-skyline-gts-t-must-see/
Share on other sites

so have you just bought my old car and raised the price or whats the story???

i know it was advertised for around the 13k mark about a month ago.

also who installed the hiflo turbo?

was only a stock rb20 turbo sitting top mount when i built the car and sold it

would also love to know where u got the price for those rims from.

i personally know the person who had those rims made and he doesnt know how much they set him back. but yes not cheap.

lightened flywheel???

been in autosaloon once as i did it and that was 08 just after spikes auto painted it.

wouldnt bullshit ppl as this car is very well know and ppl know whats in it especially on the forums

also it has seen the track as i did some sliding in it.

also using your old pictures....that's your number on the front windscreen? lol

ha ha yea. that was the day i went out balls and all and slammed f*k out of it for street machines assoc car show.

did a lil drive in it like that and got some serious attention. even a cop chucked a u bolt but traffic let me cruise off. lol

im waiting for the pic to surface with my old engine bay shot with the crap to4 on it.

no i havent just raised the price mate. when i purchased the car it had the rb25 in it but an rb20 gearbox :( i upgraded it to an rb25det gearbox which cost me roughly $2,200 due to all the mod needed to suit e.g shortened tailshaft(properly balanced) and had to make custom brackets to fit gearbox as rb25 is 10mm longer then rb20. i got the price from roh for the wheels. these are new prices. put platnum spark plugs coilpacks. gauges etc. it is well worth the money buddy. im not bagging u in anyway sneaky as u are the builder of a f**kING machine :) i just need a 4wd hey.. for work and camping :)

it was advertised for 13k with the gearbox and tailshaft mod done previously.

seriously i dont know why it didnt get sold then.

i had several ppl ring me up and let me know that it was for sale and that is why i looked.

i never got defected in that car but f*k i came close once. he was nice and stuck by the rule book.

tires have to be inside the guards but yet cause of the stretch i had the rims were outside guards.

still have vin number sticker sittin here issued but transport sa about 18mths ago.

it was insanely clean when i had this car. i have stupid amount of pics somewhere of various parts of the build and paint prep.

still want the wheels back so they can go on the original car they were actually built for so i can drift on them again.

would love to see more pics of it up tho. engine interior and exterior.

Edited by sneaky1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...