Jump to content
SAU Community

Recommended Posts

ROCK BOTTOM

Kando-TD06.jpg

Well my efforts on making both Raleigh and Wakefield in my own car have been thwarted. The whole “getting the Stagea ready” ordeal has just been one giant nightmare. Basically anything that could go wrong, has. I’m pretty sure I’ve said this in an earlier post but still I must emphasize how f**ked up it’s gotten.

After my last post, the Stagea had headed to a place called In-car Racing in Wetherill park. The original tuner (Micks Motorsports) didn’t have time do tune the Stagea before Raleigh raceway so we had to settle for someone who could.

Anthony and I thought we had accomplished what we set out to do, but the guys at In-car were adamant that my ECU was fried. Anyway the whole ordeal went on for two days which ment I missed out on the Raleigh drift fest. After being inspected by Haltech, my E11 was in perfect working order, and it was led to believe that In-car’s software was to blame.

Stanced-stagea-1024x1024.jpg

The following Monday, the car was pulled out of In-Car and got towed to Micks Motorsport. I thought we’d be all apples from now on, but nope. It just happened that my new injectors shit themselves so I needed to get new items. With time being a luxury we opted to high-flow the standard injectors.

“What else can go wrong? This has to be it!” so I thought. It was cutting close to Wakefield, and I was getting extremely anxious, messaging Anth constantly whether there were any updates on the tune from Mick. Wednesday night Anth called me and told me something I definitely wasn’t expecting to hear. “The turbo is f**ked, it’s not making any boost”. My heart sunk and I realised at that point I won’t be attending Matsuri in my own car .. for the third time in a row.

Cracked-diff-front-cover.jpg

To add further insult to injury, I had discovered that the diff cover was cracked in three places. This was causing quite a loss of fluid as you’d imagine. Luckily I got my hands on a cheap diff setup out of a wrecked Stagea and I’ve swapped the covers over for now. I believe this was caused by my shitty solid diff mounts. The kit I have utilized new lugs that have an extension on them which meets the stud off the cover. This makes lining them up a complete pain in the ass and it’s really easy to thread the lug, or even worse the front cover.

I’ve ordered the GK Tech solid diff mounts to prevent this from happening again, as they use standard nuts and bolts.

Stanced-Stagea-rear-1024x1024.jpg

I really didn’t expect it all to turn out the way it did … I didn’t think I was that unlucky. But hey, it can only get better from here right?

A brand new Kando TD06 is currently on its way which will be perfect for the OEM look I am going for, and will bolt up to all the current fab work. A few things need to be finalized with the car aswell. It SHOULD be smooth sailing from here on in, but with my track record so far anything can happen.

Sorry to hear it went awry mate. If it's any consolation, the car looks amazing and the thread keeps me inspired!

I still have the gearbox sitting at kidafa's house waiting to be installed, the Nismo twin plate arrived last week and looks the business... Thanks for that! The 3076r with Tial ext. gate, AM performance low mount mani and dump + deatschwerk 1000cc injectors are still sitting in the garage. I can't wait to compare results, now all I need is the time to install the bits :P

I hope your luck turns mate, can't wait to see some photos of the car in action :)

harts.

Edited by stageaharts

dish is very nice. but what's with the diffrent wheels front and rear?

The rears on it currently are my skid wheels. I'm still playing around with fitment and my alingment settings (too much rear camber) so I've put a smaller tyre on the Vienna rear.

sorry to hear bud..no doubt this thing wil be a weapon

Cheers mate, should be good once it's finally up and running properly.

Sorry to hear it went awry mate. If it's any consolation, the car looks amazing and the thread keeps me inspired!

I still have the gearbox sitting at kidafa's house waiting to be installed, the Nismo twin plate arrived last week and looks the business... Thanks for that! The 3076r with Tial ext. gate, AM performance low mount mani and dump + deatschwerk 1000cc injectors are still sitting in the garage. I can't wait to compare results, now all I need is the time to install the bits :P

I hope your luck turns mate, can't wait to see some photos of the car in action :)

harts.

Hey Harts,

Good to hear the clutch arrived! It looked like a beast when we were sorting it out from Japan for ya :)

Sounds like your Stag will be a complete weapon! I wanted to go 3076 after this whole turbo thing happened, but everythings been made to suit a TD06, and with how everything has gone at the moment I'm running super low on cash.

Thank you for the kind words :) Get working on your car already!

They sure are.

My 33 made 320kw on 14psi with E85.

But regardless, I'm happy with anything over 260kw on the Stagea, it's more than enough to have fun on the street, and get killing tyres at the track.

You know what Adam, I'm in exactly the same boat (no pun intended :P). My first tune, I'll be happy with between 250-270kw (98 Ron pump fuel), I'll tune for e85 down the track. I think the jump from 159 at the wheels to the afore mentioned amount should be plenty for the time being... I just wanted the headroom for e85 later on, when it is more practicable :)

LOCK AND LOAD

Run-it-hard-Stagea.jpg

This weekend I was stuck in the car-hole, tinkering away on the Stagea yet again. I had a few things I wanted to get off the “list of shit to do”.

I played around with the camber settings all round, and got everything where I wanted it. I ditched the 245 for a 235 in hope to run less camber. By the looks of it I’ve reduced it by half, which I’m happy to live with.

Kando-TD061.jpg

In other news, the car is off to Dahtone again today to get finished off. The new turbo has just arrived. This one is a Kando TD06 12cm, it should hit hard and make good power on the RB25. Ohh I’m getting excited just thinking about it.

stupid forum didn't load the remainder of the pics

run-it-hard-stagea-1.jpg

Kando-TD061.jpg

It could be a turbo the Evo's use, haven't looked into it. There are a lot of variatons on the turbo though.

Competition - Guess the power figure

Boss-Stagea.jpg

The Stagea is just about ready for its final tune, it’ll be on its way to Micks Motorsport in the following days for him to work his magic.

So it’s a fitting time for a little competition, which means there’s a chance to win free stuff!

The closest three guesses to the final power output will win Run It Hard merchandise!

1st place – Run It Hard! T-Shirt + sticker pack

2nd & 3rd place – Sticker pack

Here’s a run-down of what’s installed on the Stagea:

•Standard RB25DET

•Kando TD06-20G 12cm

•Turbosmart comp gate

•3 inch exhaust

•return flow intercooler

•High flow injectors

•Walbro fuel pump

•Haltech ECU

•Running roughly 20psi

•Tuned for 98 octane

•RWD

To be eligible, you must put your guess on the blog’s comment section.

So, what do you think it’ll make?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...