Jump to content
SAU Community

Recommended Posts

First and foremost I wish to extend my condolences to the people of Japan. I don't have an economics or commerce background so I need some answers from some one who may have a better insight into the matter.

The question I have is exactly how much will these incidents affect import cost and import quality. I would imagine that a number of import vehicles would have been damaged but that's just going on presumptions.

Prior to the disasters, we where buying approximately 82-3 Yen for every $AUD, several days after the incidents we dropped to 73 from memory and now we are back up at about 80. I recognise the fact that a lot of Japanese investors are pulling out from overseas markets and backing up their economy, in saying this what will the ultimate result be say in 3 months time?

Edited by PSI-FED
  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hi PSI

to answer a few questions you have i would say the exchange rate has always been a major factor in exporting to Australia so i don't think much has changes as you just need to allow for this as a factor for importing. so yes it does impact the costs to a certain degree, but all leading importers always factor this into account.

As for Quality goes nothing changes any vehicle that have been flood effected get a certain rating usually grade 1 from auctions if the make it that far and really most cars affected will go straight to recycling plants as most of you would have seen the amount of damage to these cars on TV they are completely wrecked. Also the effected communities are not the types of places that you would see many performance vehicles or such as they are fishing villages and or small farming areas. finding a flood effected vehicle in the market for Australia i would assume is fairly well protected and if you are using buyers in japan that you have had long standing relations or know of many that have held high reputations should easily provide the information on any vehicle that has been involved in such floods or tsumami effected areas. also these areas are not normally areas exporters buy from also but this does not mean vehicles from these location do not get exported or moved to large auctions in japan.

another reason you would not see so many tsunami effected vehicles at auction is the superstition that Japanese have with all things used and one of the biggest items is the bad luck passed on by previous vehicles owners. i myself have spent many times at recycling plants in northern Japan buying vehicles for parts i have seen so many things inside cars that would make you think why is that still inside the car ( IE Mobile phones, clothes nice , jackets , brief cases , many CDS , jewelry and other personal effects) these are left inside the cars because if the owners survive the accidents the believe that the bad luck should stay with the cars and just walk away not claiming anything from inside the cars once they are clear. funny as it sounds but true in many cases.

Ultimately at the end of the day yes it does effect us importing for us in some ways but i believe the negativity of this being in a bad way will not factor into exports for Australians in a major way. for those who have had dealings with reputable companies in japan or have someone who is in the know of who is good or not you should continue to use those companies. buying blind off any 1 unknown company in japan has always been a hit and miss and buyer beware.

SSS automotive one of the oldest and most established import businesses in aus. Joe and Geoff have been importing stuff from japan for a long time (like since the 90s). Joe also has what was one of, if not the first RB30 powered GTR in aus (over 10 years old now). it now has over 200,000kms on it! currently pumping out somewhere around 500kw atw. They both travel to japan frequently and Joe has spent years living there buying cars and parts and shipping them back. They have their own house, and big workshop and yard in japan. I really hope their stuff is ok. Both are great guys and work bloody hard for their money.

http://www.sssautomotive.com.au/

That's Sad news :( as is anybody affected by it...

I was once asking for some part for a cefiro when I was younger and dumber... someone told me "SSS have heaps of cefiro handcuts right now!!"

So I was like oh sweet!!

So I jumped straight in my car and drove to SSS auto up the street from me....

http://www.sssauto.com.au/index.htm

...not the same shop

yeah not the same guys. SSS in sydney have been supplying bits all over aus since the aus import scene was in it's infancy. as I said Joe imported his R32 GTR back in the 90s and put a 3litre RB26 in it in the 90s too and ran masive tiwn high mount 2835s on it for around 400kw, with 6 speed box, big AP brakes etc and lots of cool touches. I think it had 30,000kms or something on it when he bought it and now has over 200,000. it's a very nice GTR still today.

yes.. it was an awkward moment for all when i walked into the reception area demanding to view their A31 cefiro halfcuts and saying that i was so hapy that someone local had a cefiro halfcut cos it was so hard to find parts for my car...

the owner comes out n he's like

...wtf is a cefiro. you mean a commodore?? we sell tail lights for your commodore...

my panel beater is waiting on parts from nissan japan to send over here so my car can finally be repaired but there are massive delays atm..the parts were ordered a couple of days before the tsunami hit so they hadnt been sent yet. has already been two months since the accident so little bit longer cant hurt compared to the suffering of other eople at the moment.

panel beater was saying that toyota and nissan are both shut down in japan at the moment

hope the news bout SSS turns out to be false, have got parts from there several times, really great guys

bad news for all concerned over there but any involved all over the world with any industry effected. i am tied up with uranium study and production and hearing all sort of negatives about the situation. regardless of that anyone remember what happen with the dunlop factory in Kobe when they had there problems there. took years for production to get up and running again. About 20% of solar panels that we use here in Aus are made in areas affected and will yet again takes years to catch up.

more important than all this is the loss of life and total loss of families.

yeah I checked about SSS last night. it's true unfortunately. and Geoff was over there at the time. he was lucky to get out when the quake hit but he said the yard is gone. :(

Given japan has bought back /repatriated a lot of its currency is thier currency going to get stronger?

This along with the supply available makes me think things out of Japan are going to be more expensive. Time will tell.

Japan currency wont get higher as the Japan Bank has poured billions of yen in to stop this happening.

If they hadnt you would have probably seen the Aussie dollar in the very low 70's if not lower and same for the US dollar against the yen right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...