Jump to content
SAU Community

Recommended Posts

First and foremost I wish to extend my condolences to the people of Japan. I don't have an economics or commerce background so I need some answers from some one who may have a better insight into the matter.

The question I have is exactly how much will these incidents affect import cost and import quality. I would imagine that a number of import vehicles would have been damaged but that's just going on presumptions.

Prior to the disasters, we where buying approximately 82-3 Yen for every $AUD, several days after the incidents we dropped to 73 from memory and now we are back up at about 80. I recognise the fact that a lot of Japanese investors are pulling out from overseas markets and backing up their economy, in saying this what will the ultimate result be say in 3 months time?

Edited by PSI-FED
  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hi PSI

to answer a few questions you have i would say the exchange rate has always been a major factor in exporting to Australia so i don't think much has changes as you just need to allow for this as a factor for importing. so yes it does impact the costs to a certain degree, but all leading importers always factor this into account.

As for Quality goes nothing changes any vehicle that have been flood effected get a certain rating usually grade 1 from auctions if the make it that far and really most cars affected will go straight to recycling plants as most of you would have seen the amount of damage to these cars on TV they are completely wrecked. Also the effected communities are not the types of places that you would see many performance vehicles or such as they are fishing villages and or small farming areas. finding a flood effected vehicle in the market for Australia i would assume is fairly well protected and if you are using buyers in japan that you have had long standing relations or know of many that have held high reputations should easily provide the information on any vehicle that has been involved in such floods or tsumami effected areas. also these areas are not normally areas exporters buy from also but this does not mean vehicles from these location do not get exported or moved to large auctions in japan.

another reason you would not see so many tsunami effected vehicles at auction is the superstition that Japanese have with all things used and one of the biggest items is the bad luck passed on by previous vehicles owners. i myself have spent many times at recycling plants in northern Japan buying vehicles for parts i have seen so many things inside cars that would make you think why is that still inside the car ( IE Mobile phones, clothes nice , jackets , brief cases , many CDS , jewelry and other personal effects) these are left inside the cars because if the owners survive the accidents the believe that the bad luck should stay with the cars and just walk away not claiming anything from inside the cars once they are clear. funny as it sounds but true in many cases.

Ultimately at the end of the day yes it does effect us importing for us in some ways but i believe the negativity of this being in a bad way will not factor into exports for Australians in a major way. for those who have had dealings with reputable companies in japan or have someone who is in the know of who is good or not you should continue to use those companies. buying blind off any 1 unknown company in japan has always been a hit and miss and buyer beware.

SSS automotive one of the oldest and most established import businesses in aus. Joe and Geoff have been importing stuff from japan for a long time (like since the 90s). Joe also has what was one of, if not the first RB30 powered GTR in aus (over 10 years old now). it now has over 200,000kms on it! currently pumping out somewhere around 500kw atw. They both travel to japan frequently and Joe has spent years living there buying cars and parts and shipping them back. They have their own house, and big workshop and yard in japan. I really hope their stuff is ok. Both are great guys and work bloody hard for their money.

http://www.sssautomotive.com.au/

That's Sad news :( as is anybody affected by it...

I was once asking for some part for a cefiro when I was younger and dumber... someone told me "SSS have heaps of cefiro handcuts right now!!"

So I was like oh sweet!!

So I jumped straight in my car and drove to SSS auto up the street from me....

http://www.sssauto.com.au/index.htm

...not the same shop

yeah not the same guys. SSS in sydney have been supplying bits all over aus since the aus import scene was in it's infancy. as I said Joe imported his R32 GTR back in the 90s and put a 3litre RB26 in it in the 90s too and ran masive tiwn high mount 2835s on it for around 400kw, with 6 speed box, big AP brakes etc and lots of cool touches. I think it had 30,000kms or something on it when he bought it and now has over 200,000. it's a very nice GTR still today.

yes.. it was an awkward moment for all when i walked into the reception area demanding to view their A31 cefiro halfcuts and saying that i was so hapy that someone local had a cefiro halfcut cos it was so hard to find parts for my car...

the owner comes out n he's like

...wtf is a cefiro. you mean a commodore?? we sell tail lights for your commodore...

my panel beater is waiting on parts from nissan japan to send over here so my car can finally be repaired but there are massive delays atm..the parts were ordered a couple of days before the tsunami hit so they hadnt been sent yet. has already been two months since the accident so little bit longer cant hurt compared to the suffering of other eople at the moment.

panel beater was saying that toyota and nissan are both shut down in japan at the moment

hope the news bout SSS turns out to be false, have got parts from there several times, really great guys

bad news for all concerned over there but any involved all over the world with any industry effected. i am tied up with uranium study and production and hearing all sort of negatives about the situation. regardless of that anyone remember what happen with the dunlop factory in Kobe when they had there problems there. took years for production to get up and running again. About 20% of solar panels that we use here in Aus are made in areas affected and will yet again takes years to catch up.

more important than all this is the loss of life and total loss of families.

yeah I checked about SSS last night. it's true unfortunately. and Geoff was over there at the time. he was lucky to get out when the quake hit but he said the yard is gone. :(

Given japan has bought back /repatriated a lot of its currency is thier currency going to get stronger?

This along with the supply available makes me think things out of Japan are going to be more expensive. Time will tell.

Japan currency wont get higher as the Japan Bank has poured billions of yen in to stop this happening.

If they hadnt you would have probably seen the Aussie dollar in the very low 70's if not lower and same for the US dollar against the yen right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...