Jump to content
SAU Community

Recommended Posts

First and foremost I wish to extend my condolences to the people of Japan. I don't have an economics or commerce background so I need some answers from some one who may have a better insight into the matter.

The question I have is exactly how much will these incidents affect import cost and import quality. I would imagine that a number of import vehicles would have been damaged but that's just going on presumptions.

Prior to the disasters, we where buying approximately 82-3 Yen for every $AUD, several days after the incidents we dropped to 73 from memory and now we are back up at about 80. I recognise the fact that a lot of Japanese investors are pulling out from overseas markets and backing up their economy, in saying this what will the ultimate result be say in 3 months time?

Edited by PSI-FED
  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hi PSI

to answer a few questions you have i would say the exchange rate has always been a major factor in exporting to Australia so i don't think much has changes as you just need to allow for this as a factor for importing. so yes it does impact the costs to a certain degree, but all leading importers always factor this into account.

As for Quality goes nothing changes any vehicle that have been flood effected get a certain rating usually grade 1 from auctions if the make it that far and really most cars affected will go straight to recycling plants as most of you would have seen the amount of damage to these cars on TV they are completely wrecked. Also the effected communities are not the types of places that you would see many performance vehicles or such as they are fishing villages and or small farming areas. finding a flood effected vehicle in the market for Australia i would assume is fairly well protected and if you are using buyers in japan that you have had long standing relations or know of many that have held high reputations should easily provide the information on any vehicle that has been involved in such floods or tsumami effected areas. also these areas are not normally areas exporters buy from also but this does not mean vehicles from these location do not get exported or moved to large auctions in japan.

another reason you would not see so many tsunami effected vehicles at auction is the superstition that Japanese have with all things used and one of the biggest items is the bad luck passed on by previous vehicles owners. i myself have spent many times at recycling plants in northern Japan buying vehicles for parts i have seen so many things inside cars that would make you think why is that still inside the car ( IE Mobile phones, clothes nice , jackets , brief cases , many CDS , jewelry and other personal effects) these are left inside the cars because if the owners survive the accidents the believe that the bad luck should stay with the cars and just walk away not claiming anything from inside the cars once they are clear. funny as it sounds but true in many cases.

Ultimately at the end of the day yes it does effect us importing for us in some ways but i believe the negativity of this being in a bad way will not factor into exports for Australians in a major way. for those who have had dealings with reputable companies in japan or have someone who is in the know of who is good or not you should continue to use those companies. buying blind off any 1 unknown company in japan has always been a hit and miss and buyer beware.

SSS automotive one of the oldest and most established import businesses in aus. Joe and Geoff have been importing stuff from japan for a long time (like since the 90s). Joe also has what was one of, if not the first RB30 powered GTR in aus (over 10 years old now). it now has over 200,000kms on it! currently pumping out somewhere around 500kw atw. They both travel to japan frequently and Joe has spent years living there buying cars and parts and shipping them back. They have their own house, and big workshop and yard in japan. I really hope their stuff is ok. Both are great guys and work bloody hard for their money.

http://www.sssautomotive.com.au/

That's Sad news :( as is anybody affected by it...

I was once asking for some part for a cefiro when I was younger and dumber... someone told me "SSS have heaps of cefiro handcuts right now!!"

So I was like oh sweet!!

So I jumped straight in my car and drove to SSS auto up the street from me....

http://www.sssauto.com.au/index.htm

...not the same shop

yeah not the same guys. SSS in sydney have been supplying bits all over aus since the aus import scene was in it's infancy. as I said Joe imported his R32 GTR back in the 90s and put a 3litre RB26 in it in the 90s too and ran masive tiwn high mount 2835s on it for around 400kw, with 6 speed box, big AP brakes etc and lots of cool touches. I think it had 30,000kms or something on it when he bought it and now has over 200,000. it's a very nice GTR still today.

yes.. it was an awkward moment for all when i walked into the reception area demanding to view their A31 cefiro halfcuts and saying that i was so hapy that someone local had a cefiro halfcut cos it was so hard to find parts for my car...

the owner comes out n he's like

...wtf is a cefiro. you mean a commodore?? we sell tail lights for your commodore...

my panel beater is waiting on parts from nissan japan to send over here so my car can finally be repaired but there are massive delays atm..the parts were ordered a couple of days before the tsunami hit so they hadnt been sent yet. has already been two months since the accident so little bit longer cant hurt compared to the suffering of other eople at the moment.

panel beater was saying that toyota and nissan are both shut down in japan at the moment

hope the news bout SSS turns out to be false, have got parts from there several times, really great guys

bad news for all concerned over there but any involved all over the world with any industry effected. i am tied up with uranium study and production and hearing all sort of negatives about the situation. regardless of that anyone remember what happen with the dunlop factory in Kobe when they had there problems there. took years for production to get up and running again. About 20% of solar panels that we use here in Aus are made in areas affected and will yet again takes years to catch up.

more important than all this is the loss of life and total loss of families.

yeah I checked about SSS last night. it's true unfortunately. and Geoff was over there at the time. he was lucky to get out when the quake hit but he said the yard is gone. :(

Given japan has bought back /repatriated a lot of its currency is thier currency going to get stronger?

This along with the supply available makes me think things out of Japan are going to be more expensive. Time will tell.

Japan currency wont get higher as the Japan Bank has poured billions of yen in to stop this happening.

If they hadnt you would have probably seen the Aussie dollar in the very low 70's if not lower and same for the US dollar against the yen right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...