Jump to content
SAU Community

Recommended Posts

Hey guys,

Need some help!

My 34 GTT has started swaying on the highway when I hit minor bumps.

The best way to describe it is that it feels like the back wants to go a different way than the front.

Also it feels like it kind of corrects itself a bit, not sure whether that's got something to do with the HICAS?

All I know is it scares the hell out of me driving on the highway now, it's kind of like driving on ice (not the drug).

Any help would be great!

Cheers,

Jaylon

Link to comment
https://www.sau.com.au/forums/topic/358371-swaying-on-highway/
Share on other sites

If your HICAS steering sensor is mis-aligned, this can cause 'crabbing' at speeds 80kph - worse, at approximately 110kph HICAS will turn off which will stop that crabbing and the rear end would kick out (experienced this myself).

I would suggest you get a suspension specialist to check your rear suspension first - see if there's any movement in bushes, etc - and particularly in the HICAS rear steering rack - this can and does happen, as it's a wearing part. If the HICAS steering rack is worn & has movement, it will basically like your rear wheels are loose and that can make the car particularly unsettled even at 60kph going over bumps (I've experienced this too).

Anyway, give that a shot first and see if you can rule things out - but there's plenty of things you can do once you've ruled that out.

  • 3 weeks later...

Got the HICAS lock bar installed and the car is worse than before, now happening bad at 80k's when going over a bumpy surface, can even do it at 60k's.

When my car was parked in my driveway I tried to push the rear from side to side but it had no give, it was solid as a rock.

Not sure if it's going to be a rear shock or maybe bushes?

It got aligned on Monday, thought they would pick something like that up when they were aligning it?

Trying to sell the car so gotta get it fixed ASAP.

Anyone have any advice?

What is the castor figure? Sounds like it started after they changed the bushes. You need max castor for straight line stability at speed 6deg or 7 deg. (usually only acheivable with adjustable arms although you can usually get a bit of adjustment with eccentric bushes). But from what you say it could be something coming adrift. Suspension shop should have checked all bolts for tightness and used a bar to check ball joints etc. A suspension shop should have a rig to test shocks or you can do it yourself. Walk around the car and push each corner down hard and let go. It should come up and stop. If it goes up and down even once the shock is shot. What is your warrant of fitness test like over there? In NZ the inspection usually picks up faulty ssupension items and a new wof will be good if you are selling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...