Jump to content
SAU Community

Recommended Posts

Hey guys,

Need some help!

My 34 GTT has started swaying on the highway when I hit minor bumps.

The best way to describe it is that it feels like the back wants to go a different way than the front.

Also it feels like it kind of corrects itself a bit, not sure whether that's got something to do with the HICAS?

All I know is it scares the hell out of me driving on the highway now, it's kind of like driving on ice (not the drug).

Any help would be great!

Cheers,

Jaylon

Link to comment
https://www.sau.com.au/forums/topic/358371-swaying-on-highway/
Share on other sites

If your HICAS steering sensor is mis-aligned, this can cause 'crabbing' at speeds 80kph - worse, at approximately 110kph HICAS will turn off which will stop that crabbing and the rear end would kick out (experienced this myself).

I would suggest you get a suspension specialist to check your rear suspension first - see if there's any movement in bushes, etc - and particularly in the HICAS rear steering rack - this can and does happen, as it's a wearing part. If the HICAS steering rack is worn & has movement, it will basically like your rear wheels are loose and that can make the car particularly unsettled even at 60kph going over bumps (I've experienced this too).

Anyway, give that a shot first and see if you can rule things out - but there's plenty of things you can do once you've ruled that out.

  • 3 weeks later...

Got the HICAS lock bar installed and the car is worse than before, now happening bad at 80k's when going over a bumpy surface, can even do it at 60k's.

When my car was parked in my driveway I tried to push the rear from side to side but it had no give, it was solid as a rock.

Not sure if it's going to be a rear shock or maybe bushes?

It got aligned on Monday, thought they would pick something like that up when they were aligning it?

Trying to sell the car so gotta get it fixed ASAP.

Anyone have any advice?

What is the castor figure? Sounds like it started after they changed the bushes. You need max castor for straight line stability at speed 6deg or 7 deg. (usually only acheivable with adjustable arms although you can usually get a bit of adjustment with eccentric bushes). But from what you say it could be something coming adrift. Suspension shop should have checked all bolts for tightness and used a bar to check ball joints etc. A suspension shop should have a rig to test shocks or you can do it yourself. Walk around the car and push each corner down hard and let go. It should come up and stop. If it goes up and down even once the shock is shot. What is your warrant of fitness test like over there? In NZ the inspection usually picks up faulty ssupension items and a new wof will be good if you are selling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...