Jump to content
SAU Community

Fs: R32 Gtr Wheels

FrAz

By FrAz,
in Tasmania

 Share

Recommended Posts

FrAz Enthusiast

FrAz

Posted
Posted

Hi guys,

Selling my set of R32 GTR standard wheels. Come with tires but they arent much chop...

Only bought them 3-4 months ago, selling due to were going to use them on my Datsun project but going to cost a bit much for my liking to do the stud conversion/suspension setup. Can't keep to use on my gtr as they wont fit over the Brembos. Only after what I paid for them.

$600 - Feel free to msg or call me on: 0409020329

Cheers, Matt.

Link to comment
https://www.sau.com.au/forums/topic/358880-fs-r32-gtr-wheels/
Share on other sites
FrAz Enthusiast

FrAz

Posted
  • Author
Posted

Haha thanks Bodie!

Rod, my Datsun project(s) are 240K coupes, restoring one back to original having only a couple of owners, one will kind of turn into a japanese style gtr 'mock up', and the other will be turned into a khana cross car, plus other one will be my donor car....

FrAz Enthusiast

FrAz

Posted
  • Author
Posted

You may be in luck then, not many more sitting around down here anymore, they come up on ebay on the mainland surprisingly regularly in the last couple of months...

I did know of a pale yellow 240K coupe in Moonah. Thinking it was in need of a restore, not sure if it is still there. Send me a PM.

Bump!

  • 1 month later...
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • Kinkstaah
      RB25DE NEO with Haltech ECU

      By Kinkstaah · Posted

      This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...