Jump to content
SAU Community

Recommended Posts

Hi forum,

For the pass few months, I've been talking to Gold Coast Nissan's GTR Sales Manager, regarding to the problem with 2009 GTR's Launch Control Problem.

As many of us know, people in the States have got upgrades from LC1 system to LC2. Source: http://www.2009gtr.c...-over-gt-r.html

Each time I call the Nissan Dealer in GC, all he said was "no, we still can't do Launch Start".

Personally, i think that having the Launch Start system and not being able to use it is just sad.

Does anyone in Australia actually got an upgrade for the 2009 series car? Or if anyone got any info whether we might or might not get an upgrade?

Thanks for reading.

ps: I know there have been a couple of these post flying around in the forum, but none have been updated.

Link to comment
https://www.sau.com.au/forums/topic/358996-2009-gtr-launch-control-issue/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

@Martin Donnon

So your saying, all Australian 2009 models uses LC2?

@LSX-438

I haven't had a chance to test the Launch Control system.

Ever since I've read about the warranty issue and the problem with the gear box, I never dared to give it a try.

Also because the GC GTR Sales Rep said that we aren't allow to use it, I've never even used it once...

If Aus 2009 are using LC2, how does the warranty work?

Thanks for reading again thumbsup.gif

Perhaps ask the dealer rep what exactly he's saying you are not allowed to do.

Ask him to be specific

Would love to hear the answer.

Will give them a call tomorrow.

But from what he said previously, He just said, "we can't use it".

Also, do you know if we are using LC1 or LC2?

And is it possible to use Launch Start when VDC is on? or if VDC is in R mode?

2009 build the LC is in VDC-OFF = LC1

2010 build the LC is in VDC-R mode = LC2

video is a whole lotta politician type back pedalling, but basically after everyone was grenading box's in 2009 with VDC Off LC at 5000rpm, Nissan for 2010 offered a 3500rpm "soft" LC with VDC-R . For 2011, LC is still in VDC-R but theyve increased the rev limit to ~4800rpm

Edited by domino_z

OK

I have a 2010 model.

So as I understand it, I put it into VDC-R mode, hold the brake with left foot, floor the accelerator with my right foot and simply release the brake to launch, and it should launch in the LC2 soft mode at 3,500RPM.

The dealer (Gold Coast) did say when I bought the car, it was good for a 3.3 Sec time!

Also, because I am still using the VDC system, my warranty is protected (or so they say?).

Have I got it right????

Thanks!

Domino i am pretty sure i could launch with VDC on, are you saying 2009 couldn't? I can't remember, i've since had my box go through the clutch relearn feature where i think they put a jap spec launch mode in, but not sure. I have some videos around somewhere.

Edited by LSX-438

@Martin:

Thanks for the info, but i think LSX have had his box tunned where he stated on the bottom post.

@LSX-438:

So what you're saying is your LC2 system is relearn not by nissan?

No, my box will now happily go above 4000rpm, but in the video (that Martin posted) it was only about 3000rpm.

Quite tame really.

To answer your other question, there are some workshops around with the consult product which can recalibrate your clutch relearn (which i am sure your dealer should be able to do).

OK

I have a 2010 model.

So as I understand it, I put it into VDC-R mode, hold the brake with left foot, floor the accelerator with my right foot and simply release the brake to launch, and it should launch in the LC2 soft mode at 3,500RPM.

The dealer (Gold Coast) did say when I bought the car, it was good for a 3.3 Sec time!

Also, because I am still using the VDC system, my warranty is protected (or so they say?).

Have I got it right????

Thanks!

Spot on. Makes no difference in launch RPM whether VDC is on or off in the LC2 cars. (All ADMs). Only diff is that you have no warranty if you do it with VDC off. Go figure.

In regards to the 3.3 second time that would be 0-60MPH not 100 kph and I've only ever seen that number in Nissan's own videos. As far as an ADM doing 0-100 in 3.3 tell your dealer he's dreaming!

Edited by fungoolie

i have yet to see an 09 build ADM do LC with VDC-R, but who knows, maybe its a software update the dealers can/are doing

put everything in R warranty mode and see what happens

the reprogramming of the LC to be used in VDC-R was done for 2010 build onwards out of the factory, and borne chiefly out of the all blown gearbox issues Nissan were having in 2008 and 2009 cars.

in R mode you can feel its not that harsh on the drivetrain. You dont get the axle tramp like alot of youtube VDC-Off vids. You can almost feel the traction being constantly regulated back n forth. For 2011 theyve taken all that programming one step further with an even quicker VDC-R LC sequence and higher rpm

Edited by domino_z

i have yet to see an 09 build ADM do LC with VDC-R, but who knows, maybe its a software update the dealers can/are doing

put everything in R warranty mode and see what happens

the reprogramming of the LC to be used in VDC-R was done for 2010 build onwards out of the factory, and borne chiefly out of the all blown gearbox issues Nissan were having in 2008 and 2009 cars.

in R mode you can feel its not that harsh on the drivetrain. You dont get the axle tramp like alot of youtube VDC-Off vids. You can almost feel the traction being constantly regulated back n forth. For 2011 theyve taken all that programming one step further with an even quicker VDC-R LC sequence and higher rpm

feels like we (09 model owners) are lab rats...i'm just saying.

Thanks for the info again domino. you and the other really helped me out :D

admittedly i held off buying the GTR when it was released in 2009 because of all the tech everyone else got that we didnt - nav, bluetooth, higher res screen etc

i still wouldnt mind some small things ive taken for granted in my euro, like auto dimming mirror, reverse sensors, auto door locks, bi-xenons, auto dipping side mirror when in reverse, etc

ill do a vid for you guys this week on how to set up the LC incar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...