Jump to content
SAU Community

Recommended Posts

I bought these headlights from the states around 6 months ago. Very good quality headlights and those leds on the side are very bright even during the day. I am selling this pair because I just bought another set with matt black housing instead of chrome. I bought these lights 6 months ago for $650 including postage. Pm me a price which you think is fair....if the price is right these headlights are yours.

p.s This sale is for headlights only it doesn't contain the Hid bulbs or ballasts.

ywu3tfso4vzq44kxwv_thumb.jpg

whacygkkuh9h59w3is_thumb.jpg

7zhqt1m27bfofdf74sky_thumb.jpg

mate, as per forum rules, you will need to state a price.

also, are the lights angled for left hand drive? i.e. right ( drive side) fires upwards and the passenger side is tilting lower?

I didnt know theres a rule.... sorry.... but I am chasing somewhere around the $375-$400 mark.... also you can adjust them using a screw driver....I just installed them as they are.... cant tell the different between the oem one... except the projectors can focus the lights alot better....

Edited by bosco

Where abouts are you? I'd like to check them out..

I'm pretty sure as they are US lights no amount of adjusting can make them suitable for australian roads.. But i wouldn't mind checking them out at night

I am in Epping sydney.....

Best thing to do would be take a photo of your car with your headlights facing against a wall, you will be able to see the beam cut off pattern on the wall.

Yeh I have taken the lights off the car already....in this youtube link they show the details etc.....where the beam are aiming etc....http://www.youtube.com/watch?v=E4o_oySbbVw

Hahaha bosco mate! Need to catch up soon, good luck with the sale!

And for anyone who's wondering what they look like at night, I've seen them in person and they are actually pretty sweet!

Edited by ModaFUR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...